Uni Range Elements and Burners

★★★★★

★★★★★

10 Reviews

Fix Number

FIX438018

Manufacturer Part Number

316075103

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

Fix Number

FIX2339242

Manufacturer Part Number

316442301

The surface elements provide heat for cooking on the top your range, typically in a smaller and larger size to fit your various pots and pans. If an element is not heating up, it is a sign that it should be replaced. This is an easy repair that does not require any tools. Before beginning this repair, ensure that the elements are turned off and cold to the touch. With the element removed, inspect the terminals for signs of corrosion or arcing. If these are present, you will need to replace the terminal block as well, or you will have the same issues come up again. This OEM replacement part measures 8 inches in diameter with five coils.

Fix Number

FIX2339241

Manufacturer Part Number

316442300

If the burner element on your range is damaged or no longer heating up, the element should be replaced. When you remove the element, check the terminals for any signs of corrosion or arcing. If you find these, you will also need to replace the terminal block (which can be purchased separately). Replacing this part is easy and does not require any tools. Please ensure that the burner is turned off and cool to the touch before beginning the repair. Lift up and pull out the old element, then line up the new one and insert into the terminal block. This is a genuine OEM part that measures 8 inches in diameter, has four turns, 220 volts, and looped terminal ends.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX2368974

Manufacturer Part Number

318372211

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.

Fix Number

FIX2582086

Manufacturer Part Number

318372210

This is a genuine OEM 6-inch burner element for your electric range or cooktop. If the element is no longer heating up, it may be time for a replacement. When you remove the old element, inspect the terminals for signs of arcing or corrosion. If these are present, you may also need to replace the terminal block that the element is plugged into. Before beginning this repair, be sure to disconnect the power supply to your range. No tools are required to replace the element, simply pull out the damaged part and push the new one into place. Please note that this part is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX1528719

Manufacturer Part Number

318178110

The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimeter. If the element doesn’t have continuity you will need to replace the element. If it doesn’t have continuity it is suggested to check the element switch because it could be defective and need to be replaced. This element is 1200 watts and is a genuine OEM part. The manufacturer suggests making sure the cooking element is cooled before starting the repair. Please remember to disconnect the power to the appliance before starting the repair.

Fix Number

FIX439671

Manufacturer Part Number

316203200

This oven broil element provides direct heat from the top of the oven, supporting both broiling and some baking functions. It measures approximately 12 ½" x 18 ½" and is rated for 3000 watts at 240 volts. Located at the top of the oven cavity, it’s a common replacement for ranges that aren’t heating properly. Installation involves removing the old element and connecting the new one using the existing hardware.

★★★★★

★★★★★

1 Review

Fix Number

FIX3506411

Manufacturer Part Number

318255605

This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not baking your food at an even temperature. This could be due to the element being burnt out or broken. Make sure to unplug the oven before you begin. You will need to remove the oven from the wall to complete this repair. This is an OEM part that comes right from the manufacturer, ensuring the best quality.

Fix Number

FIX1528763

Manufacturer Part Number

318198834

This 8-inch radiant surface element provides 2200 watts of heat for smooth, even cooking on flat-top electric ranges. It’s designed to replace a burner that no longer heats or heats unevenly. Installation should be done with the appliance unplugged. This OEM part fits select models and helps restore consistent performance.

Fix Number

FIX473948

Manufacturer Part Number

5308011964

An electric burner that stays cold or heats unevenly can make everyday cooking difficult. This large surface element measures 8 inches across and provides up to 2,100 watts of cooking heat. Its five-turn coil spreads heat beneath pots and pans, while the looped ends connect the element to the surface socket. A chrome cap covers the center area for a finished appearance. Replace the burner if the coil is broken, warped, blistered, or no longer heats as expected. Before service, disconnect electrical power and allow every cooking surface to cool fully. Confirm the size and terminal shape before ordering.