Uni Range Switches

★★★★★

★★★★★

2 Reviews

Fix Number

FIX1145040

Manufacturer Part Number

316436001

The infinite burner switch is used to control the temperature of the burner element on your stove top. This model is for the larger, eight-inch element. If your burner is not heating up or has uneven temperatures, you should first check with a multimeter to see if the issue is with the element or with the infinite burner switch. If you need to replace the switch, first disconnect the power supply to your range. To change this part, you will need access to the back panel, so you will need to pull the appliance out from the wall. To complete the repair, you will need a pair of needle nose pliers, a number one square head screwdriver, and a Philips screwdriver. The specifications for this genuine OEM part are that the switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp.

Fix Number

FIX1145039

Manufacturer Part Number

316436000

This surface burner switch controls the temperature of the stove top 6-inch surface burner. This switch is 240-volt, 1250-1500 watt, and 5.2-6.25 amp. If your element will not heat and is not defective, then you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Fix Number

FIX470145

Manufacturer Part Number

5303935086

This switch controls the stove top surface burner.

Fix Number

FIX1529262

Manufacturer Part Number

318293811

This switch controls the stove top surface burner.

Fix Number

FIX16544276

Manufacturer Part Number

5304527841

Fix Number

FIX16544277

Manufacturer Part Number

5304527842

A light or fan that responds only when its control is moved may have a worn rocker switch. This replacement switch mounts in the appliance panel and controls power to the assigned feature. Its exact job varies by model, so check the wiring diagram before installation. First inspect the bulb or fan, wiring, terminals, and power supply because another fault may be responsible. Turn off the circuit breaker and confirm the appliance has no power. Allow the cooking area to cool and wear gloves around sharp panel edges. Label each wire, avoid pulling on the wire itself, and make sure every terminal fits tightly during reassembly.

Fix Number

FIX2332507

Manufacturer Part Number

316498602

This surface burner switch controls electrical power to the cooktop element, allowing precise adjustment of heat levels. Smooth switching improves safety, responsiveness, and cooking accuracy. Replacing a faulty switch restores proper temperature control and reliable burner operation.

Fix Number

FIX2332508

Manufacturer Part Number

316498603

2100-2600W

Fix Number

FIX1529261

Manufacturer Part Number

318293810

This surface element control switch is designed to regulate the heat level of a small 6-inch electric surface burner, allowing users to smoothly adjust cooking temperatures from low to high. By controlling the amount of power sent to the heating element, it helps deliver consistent and responsive heat for everyday cooking tasks. Rated for 240 volts and capable of handling elements within the 1296 to 1680 watt range, this switch is commonly replaced when a burner will not heat, fails to turn on, or remains stuck at one temperature. As a direct-fit replacement, it restores proper burner control and safe, reliable operation of the cooktop.

Fix Number

FIX1528551

Manufacturer Part Number

316508400