Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barb
January 6, 2022
This part (continuous switch for small burner of kenmore range) has been replaced with 316436000 which might be fine electrically but how do I match up the connectors. 316021500 is square with different positions for the wires to connect.
For model number 316021500
Hi Barb,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install the switch. We have included the link to the video that you may reference on how to install it. The range in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps! Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Installation Instructions Provided by Fix customers like you.
In plunged stove, removed upper back panel, removed knob for eye, removed two screws for switch, replace switch, reassembled stove, less then 5 min of work
New control unit came with no instructions for hookup. Lugs on new control did not match old control unit. Hooked up new control and burned up two existing controls on range.Don't try to install this control without wiring instructions!
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX1145039
Manufacturer Part Number: 316436000