OEM Tappan Range Parts | Expert DIY Repair Help & Fast Shipping

$10.86

Fix Number FIX437595

Manufacturer Part Number 316048413

This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Mike from Buffalo, NY

Replaced accessories for top of electric range

I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...

$19.88

Light Bulb

Fix Number FIX12751166

Manufacturer Part Number 316538904

Clear, 120 Volt, 40 Watt.

Installation Instructions

Chris from Lillington, NC

Broken bake element & light bulb

Turned of the power at the fuse box as the oven was hard wired to the electrical source and then removed the old element via the screws at the back of the oven. Disconnected the wires from the element and then reconnected those to the new element. Screwed the element base to the back wall of the oven and then replaced the light bulb. Read more...

$9.36

Chrome Drip Bowl - 6"

★★★★★

(2)

Fix Number FIX437596

Manufacturer Part Number 316048414

This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits under 6-inch burner elements and has a diameter of approximately 8-inches. While the replacement may be visually different from the original, if you have used your correct model number to search, this will fit your appliance. Common reasons to replace this often neglected part is if it has become discolored, corroded, or otherwise damaged. Each drip bowl is sold individually. This is a good time to inspect all drip bowls on the appliance, if you would like to give your appliance a fresh look, keeping in mind that they may be different sizes and are sold separately. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Mike from Buffalo, NY

Replaced accessories for top of electric range

I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...

$7.44

Rear Drawer Glide

★★★★★

(1)

Fix Number FIX434227

Manufacturer Part Number 3051163

If you are having difficulty opening or closing the drawer at the bottom of your range, the drawer glides may be damaged. These genuine OEM rear drawer glides help to support the side of the drawer and prevent metal-to-metal contact when the drawer is pulled in and out. Replacing the part is an easy repair, and just requires a flat blade screwdriver. Remove the drawer from the bottom of your range and place it on a suitable work surface. Remove the broken drawer glide by disengaging the locking tab with the screwdriver. Snap the new drawer glide into place and put the drawer back in the bottom of your range, ensuring that the tracks are lined up. The drawer should now slide in easily. Please note that these parts are sold individually, but your drawer requires four glides ? one for each corner. If you need to replace more than one drawer glide, make sure you add the correct quantity to your cart.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Nelson E. Holley from Pottsville, PA

broken rear drawer glide

snap it out and snap it in. Read more...

$9.78

Terminal Block Kit

Fix Number FIX470125

Manufacturer Part Number 5303935058

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

SHIRLEY O from boxborough, MA

burner would not heat

removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...

$47.12

Oven Bake Element

★★★★★

(10)

Fix Number FIX438018

Manufacturer Part Number 316075103

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

Werkheiser from Saylorsburg, PA

Bake element broke

Extremely easy. I unscrewed two screws and pulled out old element and plugged in the new one. Pushed back in and screwed the screws back in. That's it Read more...

$5.60

Front Drawer Glide

★★★★★

(2)

Fix Number FIX434226

Manufacturer Part Number 3051162

If the storage drawer at the bottom of your range has become difficult to pull in or out, there may be an issue with one of your drawer glides. The drawer glides are used to help the drawer slide in and out smoothly and prevents metal-on-metal contact. The glides are sold individually, and there are four in total used in the drawer. This genuine OEM part is easy to replace, first remove the drawer from the bottom of your oven and place it on a suitable work surface. Then use a flat head screwdriver to pop the old glide off and snap the new one into place. Please note that rear drawer glides are sold separately.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Donna from Punta Gorda, FL

I broke the front bottom drawer glide of the my Figidaire Oven range.

It was a quick alignment of the plastice glide and snap, it was in. The drawer now shuts evenly and it does not look lope sided or that is hanging to one side. It was so simple but it was important to me that this drawer hung right and not look like it was falling apart. Read more...

$43.17

Surface Element - 8 Inch - 2600W

Fix Number FIX2339242

Manufacturer Part Number 316442301

The surface elements provide heat for cooking on the top your range, typically in a smaller and larger size to fit your various pots and pans. If an element is not heating up, it is a sign that it should be replaced. This is an easy repair that does not require any tools. Before beginning this repair, ensure that the elements are turned off and cold to the touch. With the element removed, inspect the terminals for signs of corrosion or arcing. If these are present, you will need to replace the terminal block as well, or you will have the same issues come up again. This OEM replacement part measures 8 inches in diameter with five coils.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

SHIRLEY O from boxborough, MA

burner would not heat

removed burners, cut wires to each burner, installed new wires from terminal block kit. reinstalled surface element. Followed directions from video located at site of the ordered items Read more...

$15.12

Main Terminal Block Kit

Fix Number FIX471605

Manufacturer Part Number 5304409888

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

$70.52

Flat Style Oven Igniter

Fix Number FIX470129

Manufacturer Part Number 5303935066

If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Gas smell
See more...

Installation Instructions

Mary from Ticonderoga, NY

When turning on the oven, it would not ignite.

Unplug the power.Took off the broiler door . Reached in , unscrewed the two screws holding the igniter (one screw was stripped so that gave me a little problem) put on the new igniter. Stripped the wires & put the caps on. Plugged back in the stove & worked great. Read more...

Tappan Range Parts

Popular Tappan Range Parts

Appliance Type

Related Pages

Popular Tappan Range Models

Tappan Range Parts

Start With Your Model Number

Popular Tappan Range Parts

Appliance Type

Related Pages

Popular Tappan Range Models