Official Maytag Range Switches

Surface Burner Element Switch, Large Burner

$55.03

Fix Number: FIX11740783
Manufacturer Part Number: WP3149400

If the large surface burner on your range will not heat up, you may need to replace the switch. This genuine OEM switch is used to control the temperature of the large 8-inch burner, along with turning it on and off. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. When replacing the switch, the electrical harness features slip-on terminals for easy installation and connections to the switch. You should examine the terminals for signs of arcing or corrosion. If these signs are present, the terminals will need to be replaced as well. The shaft for the burner knob may be longer than the switch you just removed, but you will be able to remove the excess length by using a pair of pliers. If you also need to replace the knob used to turn the switch, it can be purchased separately.

Fixes these symptoms

Element will not heat
Oven is too hot
Oven not heating evenly
See more...

Watch the install video

Dual Element Control Switch

$77.34

★★★★★

1 Review

Fix Number: FIX11754687
Manufacturer Part Number: WPW10434452

Having trouble with your cooktop’s heat settings? This dual element control switch helps regulate temperature for dual burners, giving you better control while cooking. It’s a direct replacement for select models from Whirlpool, Maytag, KitchenAid, and Amana. If your burner won’t heat or acts up, this part can help get things back on track. Be sure to confirm your model number before buying to ensure it’s the right fit.

Fixes these symptoms

Element will not heat
Oven is too hot
Oven not heating evenly
See more...

Watch the install video

Infinite Control Switch, 6"

$51.45

Fix Number: FIX11740785
Manufacturer Part Number: WP3149404

This OEM surface element control switch regulates heat for 6-inch electric burners. It fits Whirlpool, KitchenAid, Maytag, and other compatible ranges. Common signs of failure include no heat, stuck on high, or poor temperature control. Disconnect power before installation. Sold as a single unit.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Watch the install video

Infinite Switch - 8 Inch

$56.05

Fix Number: FIX11740775
Manufacturer Part Number: WP3148953

Designed for 8-inch surface burners, this infinite control switch lets you turn the burner on and adjust its heat level. It works by sending voltage to the heating element based on the knob setting. A common fix for burners that won’t heat or adjust properly, it’s compatible with several models and should be installed with the power off and proper safety steps followed.

Fixes these symptoms

Element will not heat
Oven is too hot
See more...

Infinite Switch

$73.39

Fix Number: FIX12114485
Manufacturer Part Number: W11129442

This surface burner switch regulates the temperature of the left front burner on an electric range. It turns the burner on and off to maintain the selected heat level. A damaged switch may cause heating issues.

Fixes these symptoms

Element will not heat
See more...

Watch the install video

Range Infinite Burner Switch - 8 Inch

$36.00

★★★★★

2 Reviews

Fix Number: FIX11744487
Manufacturer Part Number: WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Fixes these symptoms

Element will not heat
See more...

Burner Switch - Right Front

$158.92

Fix Number: FIX11731368
Manufacturer Part Number: W10857622

This dual surface element control switch is an OEM replacement part for select ranges. It controls the surface element, allowing you to turn it on or off and adjust the heat level. If your surface element is malfunctioning or not responding to adjustments, replacing the control switch can resolve the issue. To install the new switch, unplug the range or turn off the house circuit breaker to ensure safety. The switch is typically located behind the front control panel of the stove. Remove the panel and disconnect the old switch from its wiring connections. Install the new switch by securing it in place and reconnecting the wiring. After installation, restore power to the range and test the surface element to ensure proper function.

Fixes these symptoms

Element will not heat
See more...

Infinite Switch - 6 Inch

$51.45

Fix Number: FIX11740774
Manufacturer Part Number: WP3148952

This part carries 5.2-6.6 amps.

Fixes these symptoms

Element will not heat
See more...

Watch the install video

Surface Burner Switch - 240V

$76.45

Fix Number: FIX12347301
Manufacturer Part Number: W11120791

This surface burner switch, also known as an infinite switch, controls the heat level of stovetop burners. When you turn the knob, the switch adjusts the power to the burner for precise temperature control. If your burner won’t heat properly, overheats, or stays at a fixed temperature, the switch may need replacement. Compatible with various ranges and cooktops, this part is sold individually and does not include mounting hardware. To install, disconnect the appliance from power, remove the control knobs and panel, then use a screwdriver and pliers to replace the switch, following a wiring diagram for proper connections.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Door Switch - 250V

$46.30

Fix Number: FIX2338920
Manufacturer Part Number: W10211972

This door interlock switch ensures your microwave operates only when the door is securely closed. It communicates the door’s position to the control board, helping prevent accidental use. It’s often replaced when a microwave won’t start or heat. Installation requires accessing the door latch area and swapping out the switch, typically using basic tools.

Fixes these symptoms

Door not closing properly
Won’t turn on
See more...

Maytag Range Switches

Popular Maytag Range Switches

Related Maytag Range Parts

Maytag Range Switches

Start With Your Model Number

Popular Maytag Range Switches

Related Maytag Range Parts