Maytag Range Wire Plugs and Connectors

Maytag Appliance Parts
Shop By Part Type

Popular Maytag Range Wire Plugs and Connectors

$13.00
In Stock
Surface Burner Plug-In Block Kit
★★★★★
★★★★★
(4)
Fix Number FIX340571
Manufacturer Part Number 330031
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Fixes these symptoms
$11.88
In Stock
Heating Element Connection Wire Kit
Fix Number FIX334206
Manufacturer Part Number 279457
This heating element connection wire kit is a genuine OEM replacement for your electric dryer. The kit is used to connect the thermostat to the heater element. The kit comes with a yellow wire nut and a wire that measures approximately 5 inches in length. If your dryer is getting little to no heat, or is taking too long to dry, you may need to replace this connection wire. Please be sure to disconnect the power supply to your dryer before replacing this part.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • See more...
$18.24
In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(1)
Fix Number FIX1570190
Manufacturer Part Number 12001676
This genuine OEM kit includes the parts required to replace a surface burner receptable on your range. The kit comes with a plastic block, a metal bracket, high temperature wire nuts, and wires. The burner elements on the cooktop plug into the receptacle, and if the burner is not heating up properly, the receptacle may need to be replaced. Other signs that the receptacle is faulty is if there is corrosion on the element terminals. Before beginning this repair, please be sure to disconnect the power supply to your range. You will need a pair of wire strippers and a Phillips screwdriver for this installation.
Fixes these symptoms
$35.75
In Stock
Receptacle Kit
Fix Number FIX389217
Manufacturer Part Number 814399
This surface burner receptacle assembly comes with the receptacle, two wires, two wire nuts, and two pieces of heat-shrink tubing.
Fixes these symptoms
$29.44
In Stock
Terminal Block
Fix Number FIX11750972
Manufacturer Part Number WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Touchpad does not respond
  • See more...
$37.84
In Stock
Terminal Block
Fix Number FIX11747341
Manufacturer Part Number WP9761958
This is the terminal block for the power cord on an electric range.
Fixes these symptoms
$10.61
In Stock
Cartridge Male Contact Spade
Fix Number FIX1988157
Manufacturer Part Number Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
Fixes these symptoms
$24.18
In Stock
Main Power Terminal Block
Fix Number FIX11745232
Manufacturer Part Number WP8203546
Sold individually.
Fixes these symptoms
$57.25
In Stock
Burner Cartridge Terminal Block
Fix Number FIX11757594
Manufacturer Part Number WPY708730
This is a burner cartridge terminal block for your range/cooktop. If you are having trouble with your elements heating up, this part may need to be replaced. It does not come with spades or wiring. This part is necessary to connect your house power to your range wire harness. To order the spades or the wiring take note of your appliance and model number, as they vary depending on the unit.
Fixes these symptoms
$72.28
In Stock
Element Receptacle Assembly
Fix Number FIX11744184
Manufacturer Part Number WP74007474
This part connects the surface burner to the wiring harness.
Fixes these symptoms

Related Parts