Official Kenmore Range Switches

Infinite Burner Switch - Large Element

$46.30

Fix Number: FIX1145040
Manufacturer Part Number: 316436001

The infinite burner switch is used to control the temperature of the burner element on your stove top. This model is for the larger, eight-inch element. If your burner is not heating up or has uneven temperatures, you should first check with a multimeter to see if the issue is with the element or with the infinite burner switch. If you need to replace the switch, first disconnect the power supply to your range. To change this part, you will need access to the back panel, so you will need to pull the appliance out from the wall. To complete the repair, you will need a pair of needle nose pliers, a number one square head screwdriver, and a Philips screwdriver. The specifications for this genuine OEM part are that the switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp.

Fixes these symptoms

Element will not heat
Little to no heat when broiling
Oven is too hot
See more...

Watch the install video

Surface Burner Element Switch, Large Burner

$55.03

★★★★★

1 Review

Fix Number: FIX11740783
Manufacturer Part Number: WP3149400

If the large surface burner on your range will not heat up, you may need to replace the switch. This genuine OEM switch is used to control the temperature of the large 8-inch burner, along with turning it on and off. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. When replacing the switch, the electrical harness features slip-on terminals for easy installation and connections to the switch. You should examine the terminals for signs of arcing or corrosion. If these signs are present, the terminals will need to be replaced as well. The shaft for the burner knob may be longer than the switch you just removed, but you will be able to remove the excess length by using a pair of pliers. If you also need to replace the knob used to turn the switch, it can be purchased separately.

Fixes these symptoms

Element will not heat
Oven is too hot
Oven not heating evenly
See more...

Watch the install video

Surface Burner Switch - 8 Inch - 2500W

$43.19

★★★★★

1 Review

Fix Number: FIX236750
Manufacturer Part Number: WB24T10025

If your burner element is not turning on or heating up, it is possible there is an issue with the switch. The surface burner switch, also known as an infinite heat switch, is what turns your burner elements on and off, along with adjusting the temperature settings. The switch is controlled by the knob on the panel, and this knob sits on the shaft for the switch. Please note that burner knobs are sold separately from the switch. Before beginning this repair, you will need to disconnect the power supply to your range, and move it away from the wall so you can access the back panel. A helpful tip to keep your wires straight, is as you remove one from the old switch, immediately attach it to the same terminal on the new switch. If the connection is snug, a pair of needle nose pliers will help. This OEM replacement switch is designed to work with your 8-inch burner elements.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Watch the install video

Infinite Burner Switch - Small Element - 240V

$59.11

Fix Number: FIX1145039
Manufacturer Part Number: 316436000

This surface burner switch controls the temperature of the stove top 6-inch surface burner. This switch is 240-volt, 1250-1500 watt, and 5.2-6.25 amp. If your element will not heat and is not defective, then you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Watch the install video

Infinite Control Switch, 6"

$51.45

Fix Number: FIX11740785
Manufacturer Part Number: WP3149404

This OEM surface element control switch regulates heat for 6-inch electric burners. It fits Whirlpool, KitchenAid, Maytag, and other compatible ranges. Common signs of failure include no heat, stuck on high, or poor temperature control. Disconnect power before installation. Sold as a single unit.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Watch the install video

Infinite Switch - 8 Inch

$56.05

Fix Number: FIX11740775
Manufacturer Part Number: WP3148953

Designed for 8-inch surface burners, this infinite control switch lets you turn the burner on and adjust its heat level. It works by sending voltage to the heating element based on the knob setting. A common fix for burners that won’t heat or adjust properly, it’s compatible with several models and should be installed with the power off and proper safety steps followed.

Fixes these symptoms

Element will not heat
Oven is too hot
See more...

Watch the install video

Range Surface Element Control Switch - 6 Inch - 1560 W

$49.39

Fix Number: FIX236754
Manufacturer Part Number: WB24T10029

This infinite switch controls the heat level of a 6-inch, 1560-watt surface element by regulating power flow. It operates at 240 volts and helps maintain consistent temperatures. Replacing it can fix issues like no heat, stuck-on-high settings, or uneven heating.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Infinite Switch

$73.39

Fix Number: FIX12114485
Manufacturer Part Number: W11129442

This surface burner switch regulates the temperature of the left front burner on an electric range. It turns the burner on and off to maintain the selected heat level. A damaged switch may cause heating issues.

Fixes these symptoms

Element will not heat
See more...

Watch the install video

Range Infinite Burner Switch - 8 Inch

$36.00

★★★★★

2 Reviews

Fix Number: FIX11744487
Manufacturer Part Number: WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Fixes these symptoms

Element will not heat
See more...

Watch the install video

Dual surface element switch

$122.69

Fix Number: FIX3504401
Manufacturer Part Number: 316238201

This switch controls the stove top surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part.

Fixes these symptoms

Element will not heat
See more...

Kenmore Range Switches

Popular Kenmore Range Switches

Related Kenmore Range Parts

Kenmore Range Switches

Start With Your Model Number

Popular Kenmore Range Switches

Related Kenmore Range Parts