Inglis Range Switches

Surface Burner Element Switch, Large Burner

★★★★★

★★★★★

1 Review

If the large surface burner on your range will not heat up, you may need to replace the switch. This genuine OEM switch is used to control the temperature of the large 8-inch burner, along with turning it on and off. Please be sure to disconnect the power supply to your range before beginning this repair, as you will be working with electrical components. When replacing the switch, the electrical harness features slip-on terminals for easy installation and connections to the switch. You should examine the terminals for signs of arcing or corrosion. If these signs are present, the terminals will need to be replaced as well. The shaft for the burner knob may be longer than the switch you just removed, but you will be able to remove the excess length by using a pair of pliers. If you also need to replace the knob used to turn the switch, it can be purchased separately.

Dual Element Control Switch

★★★★★

★★★★★

1 Review

This switch controls the stove top surface burner.

Infinite Switch - 8 Inch This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Infinite Control Switch, 6" This switch controls the stove top 6" surface burner.

Infinite Switch - 6 Inch This part carries 5.2-6.6 amps.

Switch, Infinite (Left Front) This switch controls the stove top surface burner.

Dual Infinite Switch This switch allows you to choose which size burner you require according to the size of the pots and pans you're using.

Infinite Dual Switch

Oven Temperature Switch - 240V

Infinite Burner Switch - 1800W This switch is used on the small burner, right front or left rear.