General Electric Range Switches

General Electric Appliance Parts

Popular General Electric Range Switches

Range Surface Element Control Switch
$49.39
In Stock
Fix Number
FIX11729102
Manufacturer Part Number
WB24X25013
This control switch adjusts the heat level of your stove’s burner by cycling power based on your settings. It can help fix issues like overheating or burners not heating at all. Always disconnect power before replacing to stay safe.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX236750
Manufacturer Part Number
WB24T10025
If your burner element is not turning on or heating up, it is possible there is an issue with the switch. The surface burner switch, also known as an infinite heat switch, is what turns your burner elements on and off, along with adjusting the temperature settings. The switch is controlled by the knob on the panel, and this knob sits on the shaft for the switch. Please note that burner knobs are sold separately from the switch. Before beginning this repair, you will need to disconnect the power supply to your range, and move it away from the wall so you can access the back panel. A helpful tip to keep your wires straight, is as you remove one from the old switch, immediately attach it to the same terminal on the new switch. If the connection is snug, a pair of needle nose pliers will help. This OEM replacement switch is designed to work with your 8-inch burner elements.
Fixes these symptoms
  • Element will not heat
  • Oven is too hot
  • Will Not Start
  • See more...
LIGHT SWITCH
$34.97
In Stock
Fix Number
FIX16554876
Manufacturer Part Number
WR23X37285
The light switch in your refrigerator is used to turn the light on and off when the fridge door opens or closes. This is considered a closed switch, which means that when the fridge door depresses the button there is no continuity and the light turns off. When the fridge door opens and the button is released, there is continuity, and the light turns on. If the light in your fridge is not burned out but will not come on, the switch may need to be replaced. This genuine OEM replacement light switch is spring loaded and made of a white plastic. This is an easy repair that will require a flat blade screwdriver and a pair of needle nose pliers to complete the job. Since you will be working with electrical components, please be sure to disconnect the power supply to your fridge before beginning this repair.
Fixes these symptoms
Fix Number
FIX236754
Manufacturer Part Number
WB24T10029
This infinite switch controls the heat level of a 6-inch, 1560-watt surface element by regulating power flow. It operates at 240 volts and helps maintain consistent temperatures. Replacing it can fix issues like no heat, stuck-on-high settings, or uneven heating.
Fixes these symptoms
Secondary Door Switch
$46.30
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX237421
Manufacturer Part Number
WB24X829
This secondary door switch is also known as a micro switch, and it is a genuine OEM replacement part for your microwave. The switch communicates with the electronic control board, to let it know if the microwave door is open or closed. The purpose of this is so that your microwave does not operate while the door is open. When the door is shut, the switch closes and the circuit completes allowing the appliance to operate. If the switch is faulty, it may result in your microwave not working properly when the door is closed, or it may run when the door is opened, neither situation is ideal and the switch should be replaced. Use extreme caution when replacing this part, as the capacitor is able to store large amounts of electricity even when the microwave is unplugged. Be sure to discharge the capacitor first, or if you are not comfortable completing the repair yourself, please call a service technician.
Fixes these symptoms
  • Doesn’t shut off
  • Door not closing properly
  • No heat
  • See more...
Monitor Door Switch
$47.33
In Stock
Fix Number
FIX237422
Manufacturer Part Number
WB24X830
Fixes these symptoms
  • Doesn’t shut off
  • No heat
  • Won’t turn on
  • See more...
Fix Number
FIX1765836
Manufacturer Part Number
WB24T10146
This part is the replacement surface burner switch or element control switch for your range or cooktop. The burner switch turns the surface element on and off and controls the amount of heat the element produces. If you are unable to start your heating element, or if the temperature is unpredictable, you may have a damaged surface burner switch. Be sure to disconnect your range from the power source or shut off the circuit breaker before repairing this part. It is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Range Infinite Heat Switch Kit
$51.97
On Order
Fix Number
FIX16216966
Manufacturer Part Number
WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX2339825
Manufacturer Part Number
WB24T10153
This switch controls the stove top surface burner.
Fixes these symptoms
Surface Burner Infinite Switch - 1250W
$99.44
In Stock
Fix Number
FIX236747
Manufacturer Part Number
WB24T10022
Control your cooktop’s heat with this genuine infinite surface element switch, designed to regulate power to individual burners for precise temperature adjustment. Operating at 1250W and 240V, it allows smooth transitions from low to high heat for consistent cooking results. This durable OEM component helps resolve issues such as burners not heating, overheating, or delivering uneven heat. Installation is simple—disconnect power, remove the faulty switch, and secure the new one in place for reliable performance.

Related General Electric Range Parts