Amana Microwave Parts

Light Bulb - 40W

★★★★★

★★★★★

(2)

To access the exterior lightbulb, the bottom panel of the microwave will need to be removed. It is secured in place with screws, so will require a Philips screwdriver to remove it. Screw the new light bulb directly into the light socket. If this is the first time you have replaced this light bulb, the old light bulb might be held in place with silicone. This silicone will need to be cut off using either a utility knife or dental floss before removing the light bulb. Once this silicone and old bulb has been removed, the replacement bulb can be screwed in its place.

Light Bulb - 40W

★★★★★

★★★★★

(2)

This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

Charcoal Filter This is a charcoal filter for an over-the-range microwave. It is designed to absorb grease before making its way into the vent, which could cause damage or build-up. It also helps to reduce odors while cooking on the stove top. If you notice the exhaust fan of your microwave is not functioning properly, it is likely the filter that needs to be replaced. To ensure it is working at peak performance it should be replaced every 6 months. This part is located inside the intake grille, which will need to be unscrewed and removed to reveal the filter. It is sold individually and measures approximately 5-inches by 5.375-inches. It is sourced directly from the manufacturer, ensuring it will be the correct fit for your model.

Grease Filter

★★★★★

★★★★★

(1)

This is a single grease filter for a microwave. Most microwaves have two filters, the other one being the charcoal filter, which is a different filter, sold separately, and has different maintenance instructions. The grease filter prevents grease from making its way into the ventilating hood. If you notice grease has started to accumulate in this area, the grease filter should either be cleaned or replaced. When cleaning the grease filter, be sure to use mild soap and water as harmful chemicals can cause damage, and this should be repeated monthly. This filter is located on the underside of the microwave. To remove it, slide the filter away from the tab area and drop out the filter. To install your new filter, place the end of the filter into the opening opposite to the tab area, lift the other end, and slide it into the tab area until it is secure.

Heat Resistant Adhesive This is an OEM part sourced directly from the manufacturer. This white silicone adhesive caulk is commonly used on ranges, microwaves, and cooktops. This adhesive sealant works to form a bond between the components of your appliance. Most often this adhesive is used with gaskets, with felt seals, and with rubber feet. Due to varied uses on a number of appliances we recommend you refer to model specific diagrams for appropriate applications. This is a three-ounce tube of sealant; it is sold individually.

Light Bulb - 120V 25W This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.

Ceramic Fuse - 20 amp This is a ceramic fuse for a microwave. It is just over 1 inch long. This fuse is 20 amps and 250 volts. This part powers your microwave. If your appliance is not heating properly, or is not turning on, you will need to replace this part. Before making any repairs to the microwave, make sure it is unplugged and the capacitor is discharged. Capacitors can store large amounts of electricity for long periods of time. Proceed with caution.

Touch-Up Paint - White 18ml

Glass Cooking Tray

★★★★★

★★★★★

(1)

This is a glass cooking tray for your microwave. It is just over 12 inches in diameter. It has 3 partial circles to connect to the turntable driver found underneath. This tray will hold your food and rotate when your microwave is on. You will need to replace this part if it is cracked, chipped, or broken, because that could prevent it from rotating. If your tray is not turning your food will not cook evenly.

Door Switch - 3 Terminal

★★★★★

★★★★★

(1)

This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heating properly or if it runs for a few seconds but turns off.