Have you ever purchased from us before?
Thank you for helping make our site better.
Manufacturer #: 8206232A /
Manufactured by: Whirlpool /
Fix #: FIX2376034
Manufacturer #: 8206232A |
Manufactured by: Whirlpool |
Fix #: FIX2376034
Removed the screw holding the bulb cover replaced the bulb. Reinstalled the cover and screw. Remove dirty grease filter replaced with new grease filter.
Were these instructions helpful?
unscrew old bulb screw in new bulb like of cake
Removed plate under microwave - unscrewed light bulb, replaced new bulb, replaced plate.
removed 10screws dropped panel . while I was there I also replaced bulb socket probably did not need to but I felt more comfortable doing so , also felt safer to do this. don't forget even when replacing only a light bulb unplug power from unit for safety sake.
remove the cover plate, One (1) screw, remove the bulb replace with new bulb and close up. Simple
I had some cracks in the front panel of my Microwave and the handle had come off when I tried to open the door. So I ordered the front panel and the handle for my microwave. I preyed off the front panel by placing the the screw drivers flat end under the lip of the front panel and gently prying it away from the metal door in a few seconds the panel was off. I got the screws off the old door handle and placed the new handle and took the glass from the old panel and attached it to my new front panel then placed the end of the panel at an angle starting at the end with hinges and pressed firmly with my hand also with the door open you can place you fingers around both the frame and the front panel to squeeze together and it will fit in place. Pretty easy for a amateur. The light bulbs I just replaced them one by one
Went really well. Took all of 20 minutes with a Phillip's screwdriver to remove the light cover.
Does bread last longer in the fridge? Can you cut raw meat on woo…