Official Whirlpool Dryer Seals and Gaskets

$62.49

Rear Drum Felt Seal

★★★★★

1 Review

Fix Number FIX8691753

Manufacturer Part Number W10612022

This is a genuine OEM replacement rear drum seal for your dryer. This seal is made of felt and comes with the adhesive required for installation. The purpose of the seal is to prevent hot air from escaping the drum while the dryer is operating. If you notice that it is taking too long for your laundry to dry, that marks are left on your laundry, or the machine is noisy or will not tumble, then you may need to replace the seal.

Fixes these symptoms

Marks left on clothes
No heat or not enough heat
Noisy
See more...

$9.43

Lint Trap Housing Seal

Fix Number FIX11741506

Manufacturer Part Number WP339956

This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches in length, 1 inch wide, about half an inch thick, and has an adhesive backing. The seal is located between the lint duct and the bulkhead of the dryer. You may need to replace the seal if there is air leaking from the dryer while it is running, which would result in your laundry taking too long to dry.

Fixes these symptoms

No heat or not enough heat
Noisy
Takes too long to dry
See more...

$45.66

Dryer Drum Seal with Adhesive

★★★★★

1 Review

Fix Number FIX970088

Manufacturer Part Number 280114

This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.

Fixes these symptoms

Marks left on clothes
No heat or not enough heat
Noisy
See more...

$60.69

Door Gasket

★★★★★

2 Reviews

Fix Number FIX11731610

Manufacturer Part Number W10861521

This is a genuine OEM replacement door gasket for your dryer. The gasket, also known as a door seal, is used to provide an airtight seal when the dryer door is closed. If the gasket has failed it can cause hot air to escape the dryer and allow for cooler room temperature air to be sucked in. This causes the dryer to run longer, which means it is less efficient. When replacing this part, we find it easiest to remove the door from the dryer and place it on a suitable work surface. Please note that you will need a high temperature adhesive to attach the gasket to the door, and this glue is not included with the gasket.

Fixes these symptoms