Official Whirlpool Dryer Filters

Lint Filter

$61.41

Fix Number: FIX1491676
Manufacturer Part Number: W10120998

If the lint filter in your dryer has become damaged and unusable, it is important to replace it as soon as possible. The filter traps lint and other debris from your laundry, keeping it out of your air ducts. Regular cleaning of the filter helps your clothes to dry faster as it allows for better airflow, and it helps to prevent fires. A vacuum attachment can be used to clean the slot of any debris that the filter did not trap. Replacing this part is an extremely easy repair that does not require any tools. Simply remove the old filter just like you would do to clean it and put the new one in its place. This filter is a genuine OEM part that measures approximately 12.5 inches wide and 10.5 inches long.

Fixes these symptoms

Door won’t close
Marks left on clothes
See more...

Watch the install video

Dryer Lint Screen Filter

$46.46

★★★★★

4 Reviews

Fix Number: FIX11757278
Manufacturer Part Number: WPW10717210

This is a single OEM white lint filter for your dryer, located on the top of the appliance. It prevents lint from getting into the exhaust vent and on your clothes. It is very important to clean the lint filter before each load, and to replace it as soon as it damages. This repair could not be simpler, start by pulling the old lint filter completely out of the housing. Use a lint brush to clean the inside of the housing to remove any built-up lint before installing the new one. Not cleaning this area on a regular basis could shorten the life of your dryer and be a fire hazard. Slide the new filter into place, and the job is complete. This genuine OEM lint filter measures approximately 23-inches, including the attached handle, and is sold individually.

Watch the install video

Lint Filter - White Frame

$70.06

★★★★★

1 Review

Fix Number: FIX11767017
Manufacturer Part Number: WE18X25100

The lint filter is an important component of your dryer, as it traps lint and other debris from entering the dryer vents, where they can become a fire hazard. If your lint filter has become damaged or is missing entirely, it should be replaced. Clogged lint filters or dryer vents can impact the efficiency of your dryer, and it can take longer for your clothes to dry, or they may still be damp when the cycle ends. Replacing your old filter with this new OEM part is an easy job that does not require any tools. Simply remove the damaged filter, and insert the new one in its place.

Fixes these symptoms

Marks left on clothes
Noisy
Too hot
See more...

Watch the install video

Lint Filter with Handle

$36.81

★★★★★

3 Reviews

Fix Number: FIX345247
Manufacturer Part Number: 339392

This is a genuine OEM replacement lint filter for your dryer. If your lint filter has become damaged or is missing, it is important to replace it. The filter traps lint and prevents debris from entering your dryer vents. Running your dryer without a lint filter can cause your vents to become blocked, which decreases the efficiency of your dryer and is a fire hazard. Replacing this part is a very easy repair that does not require any tools. Simply lift the old filter out and replace it with the new lint filter.

Watch the install video

Dryer Lint Filter and Cover

$54.39

Fix Number: FIX11726200
Manufacturer Part Number: W10828351

This lint filter and cover assembly is a genuine OEM replacement part for your dryer. The filter is used to prevent lint and debris from entering the dryer vents. If the filter has become damaged or is missing, it will need to be replaced. This kit comes as two pieces, the filter itself and the cover. No tools are required to replace this part, simply pull out the old filter and insert the new one in its place.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Watch the install video

Lint Filter

$48.02

★★★★★

4 Reviews

Fix Number: FIX11741777
Manufacturer Part Number: WP349639

This genuine OEM lint filter has a plastic handle to make it easy to remove the filter from the dryer. If the handle has broken off, you may need to use a pair of needle nose pliers to remove the filter. It is important to clean your filter after every dry cycle to prevent lint from building up. If your lint filter has become damaged or is missing, it should be replaced so that your dryer continues to run efficiently.

Lint Filter

$62.50

★★★★★

5 Reviews

Fix Number: FIX11731421
Manufacturer Part Number: W10859086

This is the replacement lint screen for your dryer. It is made of plastic and is approximately 14 inches by 9 inches. The lint screen traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint screen is cracked or clogged, the dryer takes too long to dry, or excessive lint is accumulating inside the dryer or its venting, you may need to replace it. Simply remove the old, damaged filter, and replace it with the new one.