Official Maytag Dryer Switches

$33.68

Dryer Door Switch

★★★★★

(11)

Fix Number FIX11741701

Manufacturer Part Number WP3406107

This OEM dryer door switch is an on/off mechanism that detects when the door is open to prevent the dryer from operating. If your dryer will turn on but will not start or continues working while the door is open, you may have a faulty door switch. This part features the switch and three wires, is white in color, and measures 6.5 inches long. This switch replaces the two-wire switch that is on many models. You will find this part attached to the inside of the top end of the front panel. One end attaches to the wiring harness and the other goes through the panel to make contact with the door when the door is closed. This is a regular wear part due to such frequent use or continuous harsh handling. Depending on how the switch broke, it might make it impossible to start or stop your drying cycle. You can test the function of this part by pushing on the black tab that sticks out of the front panel to make contact with the dryer door. If there is no resistance in the tab and it does not make a clicking sound, it likely needs to be replaced.

Fixes these symptoms

Door won’t close
No heat or not enough heat
Shuts off too soon
See more...

$35.56

Push-To-Start Switch

★★★★★

(1)

Fix Number FIX11742178

Manufacturer Part Number WP3977456

The push-to-start switch is a genuine OEM part for your dryer. When the button is pressed and released, it activates the dry cycle for your laundry. If your dryer will not start or it shuts off too soon, there may be an issue with the start switch and it should be replaced. Please be sure to disconnect the power supply to your dryer before beginning this repair, as you will be working with electrical components.

Fixes these symptoms

Shuts off too soon
Will Not Start
See more...

$70.06

Push-to-Start Switch

★★★★★

(1)

Fix Number FIX11748542

Manufacturer Part Number WPW10117655

This push to start switch is an authentic OEM replacement part for your dryer. Once a setting has been selected on the timer, the switch is then used to complete the circuit and start the cycle. If your dryer will not start, you may need to replace the switch. You can use a multimeter to test if the switch is faulty. Please be sure to disconnect the power supply to your dryer before replacing this part.

Fixes these symptoms