Official Maytag Dryer Drums and Tubs

$14.20

Front Glide Kit

★★★★★

3 Reviews

Fix Number FIX1804752

Manufacturer Part Number 306508

This part is located on the front bulkhead of the dryer and helps the drum to rotate smoothly and quietly. If you notice a screeching or metal-on-metal noise while your appliance is operating, you may need to replace the front glides. This genuine OEM front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. We recommend replacing both sets of glides at the same time, which will require the purchase of two kits. To complete this repair, you will need a Philips screwdriver and a 5/16 nut-driver to remove the front panel and the bulkhead of the dryer, a drill with a 1/8-inch bit to remove the old rivets, and a rivet tool to install the new ones. Please ensure that you disconnect the power supply to your dryer before beginning this repair. While you have the appliance opened, we recommend vacuuming out any lint and debris, and inspecting the felt around the bulkhead and replacing if necessary.

Fixes these symptoms

Marks left on clothes
Noisy
Will Not Start
See more...

$13.68

Drum Glide

Fix Number FIX11741931

Manufacturer Part Number WP37001298

Located in the front bulkhead of your dryer are two drum glides, which help to ensure that the drum rotates smoothly and quietly while the dryer is operating. When the glides wear down, it can cause a metal-on-metal noise while the machine is tumbling. If you notice that your dryer is excessively noisy, is not tumbling, or is leaving marks on your clothes, it may be time to replace the glides. This genuine OEM part is sold individually, however we recommend replacing both glides at the same time to ensure even wear. Please be sure to disconnect the power supply to the dryer before beginning this repair.

Fixes these symptoms

Marks left on clothes
Noisy
Will not tumble
See more...

$53.28

Two-Piece Split Ring Bearing

Fix Number FIX334199

Manufacturer Part Number 279441

This is a replacement bearing ring kit for your dryer. The bearing rings are found on the top and bottom lips of the dryer drum. If your dryer is unusually noisy, or the drum will not turn during operation, or if there are marks left on your clothes after a cycle, you may need to replace the bearing ring kit. The kit comes with 2 bearings, one for the top and one for the bottom of the dryer drum. Remove the front panel of your dryer to access the dryer drum for this repair. At this point you can use a pair of needle nose pliers to release the old bearing rings from the drum. Snap the new bearing rings on, and reassemble the dryer to complete your repair.

Fixes these symptoms

Marks left on clothes
Noisy
Will not tumble
See more...

$40.20

Tall Baffle

Fix Number FIX11741085

Manufacturer Part Number WP33002032

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle. NOTE: Screws are NOT included.

Fixes these symptoms

Noisy
Takes too long to dry
Will not tumble
See more...

$44.44

Short Baffle

★★★★★

2 Reviews

Fix Number FIX11741064

Manufacturer Part Number WP33001755

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.

Fixes these symptoms

Noisy
Takes too long to dry
Will not tumble
See more...

$55.08

Cylinder Glide Bracket

Fix Number FIX11741912

Manufacturer Part Number WP37001036

These brackets support each side of the tub. Order quantity needed.

Fixes these symptoms

Marks left on clothes
Noisy
Will not tumble
See more...

$69.01

Drying Rack

Fix Number FIX346849

Manufacturer Part Number 3406839

This dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits dryers that are 29 inches wide, have the letter "E" following the numbers in the model number, and whose dimples are four and a half inches apart in the back of the dryer drum.