Dryer Belts

★★★★★

★★★★★

18 Reviews

Fix Number

FIX346995

Manufacturer Part Number

341241

This multi rib belt is an OEM replacement part for a dryer. It attaches to the drum, idler pulley, and motor pulley, and is responsible for spinning the drum. Over time, the belt can become frayed, brittle, and inflexible. If you can hear the motor running, but the drum does not turn, it is likely that the belt is broken. Other symptoms of a broken multi rib belt include unusual noises, failing to start, no heat, a burning smell, and an unresponsive touchpad. Depending on the model, you will find the belt by looking behind the front panel or under the main top of the dryer. This belt is 1/4-inches wide, has a length of 92-1/4-inches, and has four ridges and three groves on the belt. Each belt is sold separately.

★★★★★

★★★★★

5 Reviews

Fix Number

FIX373088

Manufacturer Part Number

4392067

This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings, and one washer. This universal maintenance kit is an all-encompassing kit for fixing a noisy dryer, among other symptoms, but noisy being the most common. It is compatible with 27-inch wide dryers built from 1965 onwards. Be sure to disconnect the dryer or shut off the house circuit breaker for the appliance before you begin your repair. To access these parts, you will need to remove the dryer drum. For this installation you will need a 1/4-inch nut driver, a long flat-blade screwdriver, a short flat-blade screw diver, and a Phillips screwdriver.

Fix Number

FIX1148434

Manufacturer Part Number

134503600

The drum belt, also known as a drive belt, is a rubber piece that wraps around the dryer drum, idler pulley, and motor pulley and is used to make the drum rotate. If you can hear the motor running, but the drum is not spinning, it may be an issue with the drum belt. Since it is made of rubber, it can become brittle with age causing it to break. Alternatively, it could be stretched out and no longer gripping to the dryer drum. Both of these issues would require you to replace the belt. To do this repair you will need a putty knife to pop open the top and front panel of your dryer, and a Phillip head screwdriver. Be sure to disconnect the power to your appliance before beginning your repair. This drum belt measures 88 and 3/4 inches long by 1/4 inch wide. As it is a genuine OEM part, this size will be compatible with your appliance model.

Fix Number

FIX382430

Manufacturer Part Number

661570

This is a single dryer drum belt that measures 93.5 inches. The belt rotates the dryer drum and is a common wear part that can become brittle over time. It can also stretch and change shape, so keep this in mind when comparing your old part to this new replacement part. When this part wears it can cause a thumping noise in your dryer, and that is a typical sign that it needs to be replaced. To access this part, you will need to remove the front panel of your dryer, and the belt will be found looped around the drummer, under the idler pulley wheel, and around the drive pulley. For a successful repair, you will need a pair of needle nose pliers, a Phillips screwdriver, a 1/4-inch nut driver, and a putty knife. Do not forget to disconnect the power to your appliance before you begin.

★★★★★

★★★★★

9 Reviews

Fix Number

FIX11757542

Manufacturer Part Number

WPY312959

This is a single OEM dryer drum belt. It measures 100 inches in length, 3/8 of an inch wide and has five ribs and four grooves. Keep in mind that this rubber drum belt will stretch over time, so if you are comparing your current belt to these specified measurements, they may not be exact. For this repair, you will need to disconnect the power, and remove the front panel and drum. You will need a 5/16 nut driver and a stubby Phillips screwdriver. While you are doing this repair, be careful not to let the belt fall into the groove in the drum, causing it to be too loose.

★★★★★

★★★★★

7 Reviews

Fix Number

FIX11742271

Manufacturer Part Number

WP40111201

The multi rib belt, which may also be called a dryer drum belt or a multi-v belt, helps to rotate the drum of the dryer. The belt wraps completely around the drum, around a tension pulley, and then around the drive motor pulley. As the motor spins it pulls the belt which in turns causes the drum to rotate. If the dryer is making a screeching noise while running, gives off a burning smell, or you can hear the motor running but the drum is not tumbling, it is likely time to replace the belt. If the belt is snapped or has been stretched out it will not be able to grip to the drum to spin it. Replacing the drum requires use of a putty knife and nut driver. This is a genuine OEM part that measures 93-3/8 inches in length and 3/8 of an inch wide. It is made of durable black rubber, is flat on one side with has five ridges on the other. The ridged side is what lays against the drum to provide the grip for tumbling. Please remember to disconnect your power supply to the appliance before beginning your repair.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11741110

Manufacturer Part Number

WP33002535

If your dryer is noisy while operating, or will not tumble at all, there may be an issue with the drum belt. Over time, the rubber can become brittle and snap, and the belt will need to be replaced. This genuine OEM multi rib dryer drum belt measures approximately 91 and 5/8-inch in length and is 3/8-inch wide. It is made of black rubber and have five ridges, helping it to grip to your dryer drum.

Fix Number

FIX11705916

Manufacturer Part Number

4400EL2001F

If the drum in your dryer will not tumble, or it is noisy while operating, there may be an issue with the drum belt. The belt is found looped around the dryer drum, a tension pulley, and a motor pulley and is used to rotate the drum so that your laundry tumbles. Over time the belt can become stretched out, or it becomes brittle and will snap. If this happens the belt will need to be replaced. If you need a replacement, this is a genuine OEM dryer drum belt. The belt measures about a quarter inch wide, and has four ribs and three groves. Please be sure to disconnect the power supply to your dryer before beginning this repair.

Fix Number

FIX2349294

Manufacturer Part Number

134719300

Fix Number

FIX4133825

Manufacturer Part Number

6602-001655