Official Amana Dryer Wheels and Rollers

Maintenance Kit

$37.44

Fix Number: FIX373087
Manufacturer Part Number: 4392065

This is an authentic drum support roller kit for 29-inch-wide dryers. It includes 1 belt, 2 roller wheels and an idler pulley. The parts in this kit allow the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension needed for a multi-ribbed belt. The belt attaches to the drum, idler pulley, and motor pulley. If these parts are damaged, it could cause loud noises such as squeaking and squealing while the drum is turning. These are normal wear parts and are best replaced as a kit to ensure optimal performance.

Fixes these symptoms

Drum Not Spinning
Heat stays on after drum has stopped
Marks left on clothes
See more...

Watch the install video

Dryer Drum Support Roller

$22.67

Fix Number: FIX11752609
Manufacturer Part Number: WPW10314173

This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separately. Most dryers require two drum rollers. It is recommended to check and replace both drum support rollers at the same time to ensure proper drum rotation and because they often wear at the same rate. The drum support roller holds the drum in the proper position while it spins on the support wheels. If rollers are worn out, they will cause the dryer to be noisy.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Watch the install video

Rear Drum Support Roller Kit

$14.36

★★★★★

3 Reviews

Fix Number: FIX347627
Manufacturer Part Number: 349241T

This is a rear drum support roller kit for your dryer. The 2 rollers come with 4 tri-rings, and 1 palnut. We recommend that you replace both rollers at once. This kit stabilizes the drum cylinder, while letting the drum rotate on the support rollers. If you are having problems with your appliance during tumble mode, or if it is too noisy, you will need this kit. To complete this repair you will need a putty knife, Philips screwdriver and a 5/16 nut driver.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

Watch the install video

Idler Pulley

$22.89

★★★★★

2 Reviews

Fix Number: FIX334244
Manufacturer Part Number: 279640

Often referred to as a dryer belt tension pulley wheel, this idler pulley is an OEM approved replacement part for a variety of dryer models. The idler pulley puts tension on the drive belt, and if the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin. It is located on the dryer drum, around the tension pulley. If your appliance is noisy during operation, will not tumble, or will not start, you may need to replace this part. It is made of durable plastic and has a diameter of roughly 2-inches. This part also includes the hardware needed for replacement. Most of our customers found this repair to be medium difficulty, and required a Philips screwdriver, 1/4-inch nut driver, putty knife, small flat blade screwdriver, and needle nose pliers to get the job done.

Fixes these symptoms

Drum Not Spinning
Noisy
Won’t Start
See more...

Watch the install video

Drum Support Roller

$20.93

★★★★★

1 Review

Fix Number: FIX11741913
Manufacturer Part Number: WP37001042

If your dryer is not tumbling, takes a long time to dry, or is noisy while tumbling, it may be time to replace the drum support rollers. These hold the drum in place while it rotates, so if they have become worn it can make for a lot of noise while the machine is operating. This genuine OEM part is sold individually, however your dryer will have two support rollers. As they tend to wear at the same rate, we suggest replacing both at the same time. The tools needed to complete this repair include a putty knife, 5/16 nut driver, and a pair of pliers. Completing this repair requires removing the drum from the dryer to access the support rollers. Be sure to disconnect power to the appliance before beginning this repair.

Fixes these symptoms

Noisy
See more...

Watch the install video

Drum Support Shaft - Rear Shaft with Left Hand Threads WPW10359272

$52.68

Fix Number: FIX11753708
Manufacturer Part Number: WPW10359272

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Fixes these symptoms

Noisy
See more...

Watch the install video

Drum Roller Shaft - Left Side

$64.37

Fix Number: FIX11753706
Manufacturer Part Number: WPW10359270

Replace the shaft of your left side drum support roller with this part from Whirlpool/Kenmore. This replacement shaft is 2-7/8 inches long. It is meant for use with many of Whirlpool/Kenmore's gas and electric clothes dryers that have been manufactured since 1965. Also known as Drum Roller Shaft.

Fixes these symptoms

Noisy
See more...

Watch the install video

Drum Support Roller Shaft - Right Hand Threads

$58.96

Fix Number: FIX11753707
Manufacturer Part Number: WPW10359271

This shaft is for the front with right hand thread. Sold individually.

Fixes these symptoms

Noisy
See more...

Watch the install video

Drum Support Roller Shaft - Right Side

$62.27

Fix Number: FIX11753705
Manufacturer Part Number: WPW10359269

Replace the shaft of your right side drum support roller with this part. This replacement shaft is 3-3/16 inches long, but does not require a washer or a nut.

Fixes these symptoms