Official Amana Dryer Pulleys

Idler Pulley with Bracket

$26.76

Fix Number: FIX11726337
Manufacturer Part Number: W10837240

If your dryer is not tumbling, will not start, or is excessively noisy while operating, there may be an issue with your idler pulley. The idler pulley works by maintaining a constant tension on the drive belt, which helps to spin the drum. If you need to replace the pulley, this is a genuine OEM part that now comes with a mounting bracket.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Idler Pulley

$26.92

★★★★★

2 Reviews

Fix Number: FIX334244
Manufacturer Part Number: 279640

Often referred to as a dryer belt tension pulley wheel, this idler pulley is an OEM approved replacement part for a variety of dryer models. The idler pulley puts tension on the drive belt, and if the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin. It is located on the dryer drum, around the tension pulley. If your appliance is noisy during operation, will not tumble, or will not start, you may need to replace this part. It is made of durable plastic and has a diameter of roughly 2-inches. This part also includes the hardware needed for replacement. Most of our customers found this repair to be medium difficulty, and required a Philips screwdriver, 1/4-inch nut driver, putty knife, small flat blade screwdriver, and needle nose pliers to get the job done.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Idler Pulley Assembly

$17.62

★★★★★

1 Review

Fix Number: FIX11743765
Manufacturer Part Number: WP691366

The idler pulley is found in your dryer and provides tension to the belt in order to rotate the drum. If your clothes are taking a long time to dry, the machine is noisy while operating, or the dryer will not start or tumble, there may be an issue with the idler pulley assembly. To replace this part, you will need to lift the top and remove the front panel of the dryer. You will want to take note of how the drum belt is positioned so it can be put back in place once the new idler pulley is in place. While you have the appliance opened up and accessible, you may want to consider replacing the drum belt at this time.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Motor Pulley - 60 Hz.

$52.87

Fix Number: FIX11744884
Manufacturer Part Number: WP8066184

Sold individually.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Dryer Idler Assembly

$35.66

★★★★★

1 Review

Fix Number: FIX11741930
Manufacturer Part Number: WP37001287

The spring for this part is sold separately. This idler assembly is for dryers. Idler assembly includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the belt to turn. Disconnect the power before installing this part. Wear work gloves to protect your hands.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Idler Pulley Wheel with Bearing

$22.26

★★★★★

2 Reviews

Fix Number: FIX11757553
Manufacturer Part Number: WPY54414

This two inch wide idler pulley wheel is beige in color and is made of plastic. This pulley wheel comes with its own metallic bearing in its center.

Fixes these symptoms

Noisy
See more...

Watch the install video

Motor Pulley

$65.81

Fix Number: FIX11727942
Manufacturer Part Number: W10837625

This part is the replacement motor pulley for your dryer. The motor pulley allows the dryer belt to run straight while the dryer is operating. If your motor pulley is damaged, your dryer may not tumble, and may not start altogether. A damaged motor pulley can also damage the dryer belt, and it may need to be replaced as well. Be sure to disconnect power from the dryer before you begin this repair. This motor pulley is a genuine OEM part sourced directly from the manufacturer.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Motor Pulley

$66.45

Fix Number: FIX11740721
Manufacturer Part Number: WP31001535

This is the replacement motor pulley for your dryer. The motor pulley transfers momentum from the drive motor to the drum via the drive belt. If the motor pulley cracks or is no longer staying on the drive shaft, you will need to replace it. You will need to access the dryer motor for this repair, by removing the front panel. The motor pulley is approximately 1 inch in diameter and is sold individually. This is an OEM part sourced directly from the manufacturer.

Fixes these symptoms