Estate Dishwasher Pumps

Fix Number

FIX11753379

Manufacturer Part Number

WPW10348269

If there is still water left in your dishwasher after it has finished running, there may be an issue with your drain pump. The pump is designed to remove water from the tub, and if that is not happening then it could be due to damaged that is causing the motor not to run or a crack causing a leak. If a new pump is required, this is a genuine OEM replacement part. Completing this repair will be easiest if you pull the dishwasher out from under the cabinet. You will need to disconnect both the water and electrical supply to the appliance before starting.

★★★★★

★★★★★

1 Review

Fix Number

FIX1734917

Manufacturer Part Number

W10083957

If your dishwasher is not cleaning your dishes properly, is not draining, or is noisy while operating, there may be an issue with your chopper assembly. The chopper is used to mince up food particles in the dishwasher, which prevents them from clogging up the pump. If you need to replace the chopper, this is a genuine OEM assembly for your dishwasher. Before beginning this repair, be sure to disconnect the power to your dishwasher. You will need to remove both the upper and lower racks from the dishwasher in order to easily access the chopper assembly. You will need a number 15 and number 20 torque screwdriver and a pair of needle nose pliers to complete this repair.

★★★★★

★★★★★

1 Review

Fix Number

FIX382822

Manufacturer Part Number

675806

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking and helps with the proper draining of the dishwasher.

Fix Number

FIX12069388

Manufacturer Part Number

8193951A

This is the replacement impeller kit for your dishwasher. This impeller kit comes with 4 pieces, including the impeller and seals which you will need for the repair. The impeller and seal kit is mounted on the dishwasher motor. If your dishwasher is not cleaning dishes properly, it may be an indication that your impeller has gone bad, and you are not getting proper water pressure. If the seals have gone bad, your dishwasher may start to leak. If you are having either of these problems, you may need to replace the impeller kit. Be sure to disconnect the water and power source from the dishwasher before you begin this repair. This is an OEM part sourced directly from the manufacturer.

Fix Number

FIX11745441

Manufacturer Part Number

WP8268375

May differ in appearance, but functions same as original. This valve allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

Fix Number

FIX11757411

Manufacturer Part Number

WPW10780877

This part moves water up from the sump collection area and up through the spray arms.

Fix Number

FIX16542935

Manufacturer Part Number

4386996A

This kit contains Impeller and Bearing Assembly.

★★★★★

★★★★★

1 Review

Fix Number

FIX11699805

Manufacturer Part Number

W10782773

*** This part no longer includes the Chopper Assembly as per the Manufacturer *** The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.

Fix Number

FIX1486701

Manufacturer Part Number

8194582

Designed to transfer water from the pump to the spray arms, this outlet and seal helps maintain proper pressure and prevent leaks. It fits a variety of dishwashers from Whirlpool and affiliated brands. Replacing a worn or damaged seal can improve cleaning performance and reduce water waste.

Fix Number

FIX11745610

Manufacturer Part Number

WP8274950

Impeller only. Seal sold separately.