Admiral Dishwasher Dishracks

Admiral Appliance Parts

Popular Admiral Dishwasher Dishracks

★★★★★
★★★★★
10 Reviews
Fix Number
FIX10065979
Manufacturer Part Number
W10712395
This OEM dishwasher upper rack adjuster kit includes the left and ride side adjusters and all the parts needed to repair the upper rack. These parts have changed from plastic to metal, so even though it looks different than the original part, it is made to be perfectly compatible. This part is located on the dishwasher rack and is connected to the track, allowing it to move in and out smoothly. If this part is damaged, it may make it difficult to move the rack in and out or it might hang down awkwardly, indicating a repair is needed.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11746591
Manufacturer Part Number
WP8565925
This is a single rack track stop clip used to prevent the upper dish rack from sliding all the way out of the dishwasher. It is made of gray plastic and can wear with time. This is an easy repair that should not take very long to complete. Start by opening the dishwasher door, depress the tabs to remove both the front stop clips and remove the upper dish rack from the appliance. Now, using your small flat head screwdriver, release the retaining tab to remove the rear stop track that you are replacing, and pull the clip up to remove it. Install the new clip by inserting it into the support rail from the top and press it down to secure it in place.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Fix Number
FIX11750093
Manufacturer Part Number
WPW10195840
The dishwasher positioner clip is also known as a rack adjuster and is used to hold the top rack in your dishwasher in the desired position. If the rack is not staying in place, the clip may have become damaged and should be replaced so that your dishwasher can clean as efficiently as possible. No tools are required for this repair, but you may find a flat blade screwdriver useful for prying off stubborn parts. To replace this part, you will need to take the top rack completely out of the dishwasher, and this will require removing the track stop clips from the ends of the rail. Once the rack is on a suitable work surface, remove the broken clip by releasing the locking tab and install the new one ensuring it clicks into place. The upper rack can now be placed back into the dishwasher, and the track stop clips can be reattached.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Not cleaning dishes properly
  • See more...
Fix Number
FIX11750092
Manufacturer Part Number
WPW10195839
The dishrack adjuster, also known as an adjuster clip, is used to change the height of the top rack in your dishwasher. If the clip has become damaged, it may not function properly, which would result in your dishrack not staying in the desired position. If this happens, the clips should be replaced. These are genuine OEM replacement rack adjusters, which are sold individually.
Fixes these symptoms
Tine Row
$49.29
In Stock
Fix Number
FIX10057161
Manufacturer Part Number
W10728160
The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will need to be replaced. The manufacturer has updated the tine row, it may look different but it will still fit like the original. This part measures approximately 19 1/2” long and is made of metal. This is a genuine OEM part and is sold individually.
Fixes these symptoms
Dishwasher Adjuster Housing Cover
$9.79
In Stock
Fix Number
FIX11751101
Manufacturer Part Number
WPW10250162
The adjuster cover goes on the outside of the adjuster housing. It is used to support the height adjuster and also protects the internal components of the adjuster housing.
Fixes these symptoms
★★★★★
★★★★★
4 Reviews
Fix Number
FIX11743069
Manufacturer Part Number
WP6-918873
This is a genuine OEM replacement silverware basket for your dishwasher. It is gray in color and comes as an assembly with a hinged cover and a handle. The basket sits in the front of the bottom rack of your dishwasher or it can be separated into two separate pieces that sit along the side. If your silverware basket becomes damaged, it can result in cutlery falling through into the bottom of the dishwasher. Replacing this part is extremely easy, just remove the old basket and put the new one in its place. To avoid damaging the new basket, be sure to carefully place utensils inside instead of dropping them.
Fixes these symptoms
Fix Number
FIX11741377
Manufacturer Part Number
WP3385089
This track attaches to the inside of the tub for the upper rack to glide in and out.
Dishrack
$157.45
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12348079
Manufacturer Part Number
W11169039
This gray upper dishrack kit fits select dishwashers. It requires assembly, and non-adjustable models may need roller transfer. The updated design may differ slightly but functions the same.
Adjuster Arm Clip
$45.00
In Stock
Fix Number
FIX11751100
Manufacturer Part Number
WPW10250160
Sold individually.
Fixes these symptoms

Related Admiral Dishwasher Parts