Tappan Cooktop Parts

Tappan Appliance Parts

Popular Tappan Cooktop Parts

Radiant Surface Element - Large - 2200W
$161.14
Special Order
Fix Number
FIX1993817
Manufacturer Part Number
903118-9010
Fixes these symptoms
Drip Bowl - 8"
$14.16
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX437595
Manufacturer Part Number
316048413
This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.
Fixes these symptoms

Installation Instructions

Mike from Buffalo, NY
Replaced accessories for top of electric range
I was simple. Using this site online afforded me the opportunity to conveniently replace accessories that were in bad shape. I will always use this site for my self-installation needs in the future. Mike , NY Read more...
Surface Burner Coil Element - 8" - 2100W
$142.54
Special Order
Fix Number
FIX473948
Manufacturer Part Number
5308011964
Fixes these symptoms
Burner Grate
$51.43
In Stock
Fix Number
FIX437719
Manufacturer Part Number
316055800
Sold individually.

Installation Instructions

EVELYN from POWAY, CA
old burner grates with no finish left on them
Bought new ones and they fit perfectly and look very nice. Read more...
Surface Indicator Light - 250V
$61.55
In Stock
Fix Number
FIX436963
Manufacturer Part Number
316022503
Burner Switch Kit
$47.14
In Stock
Fix Number
FIX470145
Manufacturer Part Number
5303935086
This switch controls the stove top surface burner.
Fixes these symptoms

Installation Instructions

Phil from Elkton, OR
8 inch surface element melted at elbow to terminal block - shot out a 6 inch flame.
Note: This is the first time I've ever tried fixing a stove. First, I ordered a new element. Took a minute to install, but it didn't solve the problem. I ordered a terminal block kit and switch kit. Replaced the terminal block. Took about 10 minutes. Only problem was the shrink sleeves melted. Electrician's tape remedied the problem. Tested the element again. It still didn't work. Following instructions provided, replaced the old switch with the new universal switch. First unplugged stove. Removed upper back panel. Took a closeup photo of switch connections, in case I messed up. Removed old switch, leaving all wires connected. Per instructions, mounted new switch and fitted dial to proper length - took about two minutes. Permanently mounted new switch. New switch wire terminals were not in the same location as on the old switch. No matter, both old and new switch terminal designations are clearly marked. Transferred wires from old terminals, one at a time, and connected to corresponding terminal on new switch. Plugged in stove. Turned on the new switch. Element worked fine. Tested the rest of the stove, just to make sure I didn't mess anything up. Everything worked. Replaced back panel. Cleaned up areas on the stove that are hard to reach while stove is in place. Slid stove back in place. Works like a champ. Read more...
Burner Pan Gasket
$40.52
In Stock
Fix Number
FIX442167
Manufacturer Part Number
318053901
MODULE
$56.24
In Stock
Fix Number
FIX11766164
Manufacturer Part Number
5304505695
Fixes these symptoms
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
SPARK MODULE
$72.17
In Stock
Fix Number
FIX11770793
Manufacturer Part Number
808608804
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Fixes these symptoms
Surface Burner Igniter Electrode
$32.12
In Stock
Fix Number
FIX436633
Manufacturer Part Number
316011200
Use this igniter with sealed burners.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...

Installation Instructions

Todd from Warwick, NY
Cracked igniter electrode
The part was exactly the right size for my model and worked perfectly. The repair however, as others have mentioned, was not so smooth. The set screw that holds the old part in place locks up and/or breaks off, in which case you have to either drill out the old screw or resort to adhesives. After several attempts to remove the screw head and shaft unsuccessfully, I ended up using loc-tite to hold the electrode in place. All this was done from beneath the burner by popping the range top up and propping it with a board. Tricky to put back too. Read more...

Tappan Cooktop Appliance Types

Related Tappan Cooktop Parts

Popular Tappan Cooktop Models