OEM KitchenAid Cooktop Parts & Accessories

Drip Bowl - 6 Inch

$10.09

Fix Number: FIX2366565
Manufacturer Part Number: W10196406RW

The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

chris from ABERDEEN, SD

Burner would not heat up and the cook top on light would not turn off.

First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...

Watch the install video

Knob - Chrome

$16.74

★★★★★

1 Review

Fix Number: FIX11744713
Manufacturer Part Number: WP7737P245-60

This is an OEM chrome control knob, measuring approximately 1-1/2 inches in diameter. This control knob either controls the speed of the cooktop fan or the heat of the burner. This knob is compatible with D-shaped shafts. This is a simple and tool-free repair, just pull the knob off the shaft and place the new one into place. This is a good opportunity to inspect all the knobs on your appliance to maintain a consistent appearance. Each knob is sold separately.

Fixes these symptoms

Element will not heat
Touchpad does not respond
Will Not Start
See more...

Installation Instructions

David from Edina, MN

Knob support was cracked due to age

Piece of cake to replace Read more...

Watch the install video

Drip Bowl - 8 Inch

$10.87

★★★★★

1 Review

Fix Number: FIX2366563
Manufacturer Part Number: W10196405RW

The drip bowl is found underneath the burner element of ranges with a rolled terminal style plug-in surface element. The purpose of the bowl is to catch any drips or spills that may occur while cooking. If the drip bowl has become damaged or tarnished beyond cleaning, it may be time for a replacement. This is a genuine OEM part that is 8-inches in size and is sold individually. When you replace the drip bowl, you will need to remove the element from the terminal block. At this time, you should also inspect the elements for any signs of damage or corrosion and replace them if necessary.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

chris from ABERDEEN, SD

Burner would not heat up and the cook top on light would not turn off.

First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...

Surface Burner Plug-In Block Kit

$13.41

★★★★★

4 Reviews

Fix Number: FIX340571
Manufacturer Part Number: 330031

This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Doris from Skoke, IL

Elements heat sporatically

I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else! Read more...

Surface Burner - 8 Inch - 2600W

$36.90

Fix Number: FIX11743367
Manufacturer Part Number: WP660533

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Robert from Boston, MA

Range surface burner not working properly

Pulled out the old burner and slipped in the new one. Also replaced burner drip bowls. Pulled out the burners, took out old bowls, replaced with new bowls, slipped back burners. All fit perfectly. Read more...

Burner Knob - Stainless Color

$31.45

Fix Number: FIX11744702
Manufacturer Part Number: WP7733P410-60

This replacement burner knob is made of plastic, painted in a stainless-steel color. It is a genuine OEM part for your range or cooktop, and designed to fit onto a D-shaped shaft. No tools are required to replace this part. With a firm grip on the defective knob, give a strong pull. The new knob can then be pressed onto the shaft. You may want to disconnect the power supply before beginning this repair, in case you turn on the heat to a burner when replacing the knob.

Fixes these symptoms