Hardwick Cooktop Parts

★★★★★

★★★★★

1 Review

Fix Number

FIX11750107

Manufacturer Part Number

WPW10196405

This chrome drip bowl is an OEM approved replacement part sourced directly from the manufacturer. Drip bowls are a part for your cooktop, positioned underneath the burner to catch spills. This drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. It is common for the manufacturer to switch up designs, so it may not match your current part, however searching using the correct model number will ensure proper fit and function. Drips bowls are prone to wear and tear and can be a fire hazard if not replaced when needed. It is also a quick, easy, and cheap way to give your appliance a fresh new look. Each drip bowl is sold individually, so if you are interested in replacing your other drips bowls, they need to be ordered separately. This is also an opportune time to inspect the terminals for corrosion or damage, and the condition of the burner. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. Give your new drip bowl a regular cleaning with warm water and soap to help it last as long as possible.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX2366565

Manufacturer Part Number

W10196406RW

The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.

★★★★★

★★★★★

4 Reviews

Fix Number

FIX340571

Manufacturer Part Number

330031

This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.

★★★★★

★★★★★

1 Review

Fix Number

FIX1570190

Manufacturer Part Number

12001676

This genuine OEM kit includes the parts required to replace a surface burner receptable on your range. The kit comes with a plastic block, a metal bracket, high temperature wire nuts, and wires. The burner elements on the cooktop plug into the receptacle, and if the burner is not heating up properly, the receptacle may need to be replaced. Other signs that the receptacle is faulty is if there is corrosion on the element terminals. Before beginning this repair, please be sure to disconnect the power supply to your range. You will need a pair of wire strippers and a Phillips screwdriver for this installation.

Fix Number

FIX11743366

Manufacturer Part Number

WP660532

The manufacturer suggests replacing the receptacle at the same time.

Fix Number

FIX11744708

Manufacturer Part Number

WP7737P026-60

This infinite switch knob is two inches in diameter. It is black and is made of color. This knob has a red indicator line as well as light gray lettering denoting the temperature level and the off, low, and high positions.

Fix Number

FIX11757481

Manufacturer Part Number

WPY04100166

This 8 inch surface burner with reinforced delta frame carries 2100 watts and 240 volts. It has five turns and is compatible with many electric ranges. Its center medallion is all black in color.

Fix Number

FIX12070192

Manufacturer Part Number

W10900107

Fix Number

FIX11757480

Manufacturer Part Number

WPY04100165

This 6 inch surface burner with reinforced delta frame carries 1250 watts and 240 volts. It has four turns and is compatible with many electric ranges. Its center medallion is all black in color.

Fix Number

FIX11740903

Manufacturer Part Number

WP3191454

This large surface burner is 2100W.