MAH21PSDWW Maytag Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- richard from amston, CT
- Parts Used:
- WP22003262
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
leaking water
removed one panel and front door to access under tub.leak solved!!!! thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Jupiter, FL
- Parts Used:
- 12001413
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Deteriorated and clogged strainer; slow water fill.
Loosened the hose coupling, removed the old washer and strainer; cleaned the opening; flushed the opening; installed new strainer and washer; reattached hose and "Bob's your uncle"! No problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Rochester, NY
- Parts Used:
- WP22003329
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Appliance repair company did a poor job and the motor fell off because of a missing isolator
I opened the back of the washer, put the isolator in the hole it belongs in. I then inserted the motor pivot pins into the holes, and installed the motor bolt. Installed and tensioned the belt, tightened the motor bolt, and installed the back cover.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Corona, CA
- Parts Used:
- WP22003848
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I was given the washing machine, noticed missing parts
We noticed there was something missing to hold the fabric softener. We found on-line the parts we needed. Ordered at about 4:00 PM and it came at 10:am the next day!!! Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from Parma, OH
- Parts Used:
- WP22003262
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
leak in tub to pump hose
removed front of washer. loosened two hose clamps. replaced hose. tightened clamps. replaced front cover.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lauraine from Kimberling City, MO
- Parts Used:
- 12001788
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
Started smelling rubber burning during spin cycle
I thought for sure the washer was toast! Thankfully, due to your website it was an easy 26.00 fix. Husband took care of the repair in about a half an hour. He did not encounter any problems with the fix and it's running like a charm!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Orlando, FL
- Parts Used:
- WP22003275
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Front-load washer leaked.
Replaced the inside door panel. Who needs a Maytag repairman! Thank you for the great instructional video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Johnsonburg Fire from Johnsonburg, PA
- Parts Used:
- WP25001052, 12001807
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Water leak
Replaced drain pump and drain hose.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Erzsebet from Vista, CA
- Parts Used:
- WP22003275
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic inner door was cracked washer was leaking.
Replaced it with the new inner dooor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gloria from Prairie City, OR
- Parts Used:
- WP22003275
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Inner door panel had a hole in it
Ordered a new inner panel and had my son in-law put it in for me. He is a mechanic so it was a quick an easy fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from las Vegas, NV
- Parts Used:
- WP25001052
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
Water didn't completely drain from tub.
Purchased the pump from parts select. Maytag wanted 250.00 for the pump!. Followed previous instructions from this site and had no problems. Washer still does not fully drain. Believe the problem is the filter. Maytag either couldnot/would not tell me me where to replace the filter. There is a spare filter taped to the inside of the washer. Maybe it fits inside the tub, above the outlet tube leading to the pump. Will check and see at a later date, unless I see a response on the website. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Slinger, WI
- Parts Used:
- WP22003262
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
We had a leak in the tub pump hose
It was very easy...we ordered the part and it only took a day and a half and it was here.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Purdys, NY
- Parts Used:
- WP22003275
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Inner door panel cracked
Removed the door from the washer and removed the screws holding the broken door panel to the outer door. Removed the clips that hold the screws in and transferred them to the new inner door panel. Removed the drain pipe and gasket (I assume that's what it's called) by unclipping the bottom from the door. There is another metal ring that had to be unscrewed. Then we screwed it to the new door panel and installed the gasket and drain pipe. Attached the new inner door panel to the outer door and screwed the door to the washer. Fairly easy repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Jo from Mesa, AZ
- Parts Used:
- WP22003275
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Inner door panel leaked
I followed the video instructions provided, without the slightest problem. I was proud I was able to accomplish this on my own. My husband wanted to buy a whole new washer, that seemed silly, so I fixed it in about 20 minutes. And no more leaks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sonia from Granite Falls, WA
- Parts Used:
- WP22003275
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Inside door for washer rubbed hole in
removed screws holding inside panel switched clips and reset and replaced screws in outer door panel. Now works with no leaks
Was this instruction helpful to you?
Thank you for voting!