55325119 General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stephen from St. Simons Island, GA
- Parts Used:
- WH1X2721
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer on/off knob broken
The pictures really made it possible to determine exactly which knob was what I needed for my dryer. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from Austin, TX
- Parts Used:
- WH1X2721
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken "start" knob
The start knob had crack in it that was getting bigger, and we'd begun using pliers to start it. Not only was it unwieldy but I thought it would eventually strip the metal stem. Of course this was a breeze of a repair--we just slid the new knob on. But my husband had been certain that finding a replacement knob--or calling a dealing and ordering the part--would be a big deal. I said: "But let's just try on-line." We quickly found the model # inside the dryer door. We filled in the appliance info, the part popped up. I ordered it. It arrived in 2 days. It's like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- karen from scottsdale, AZ
- Parts Used:
- WH1X2721
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob Broken
The knob had broken off a few months ago. I didn't think to look for one on the internet. I finally googled the brand name and part number and your company came up. It had the picture of the part which I ordered immediately. It came in the mail really quickly. I was so excited when I received the knob. I took it out of the package and slipped it over the stem in less than a minute. It went on perfectly. Now I no longer need to use pliers to turn on the dryer. It looks great and I am no longer inconvenienced. I love the new knob and would do business with this company again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Merrimack, NH
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken timer knob
used pliers to pull broken portion of knob off timer shaft then pushed new timer knob with clip onto shaft.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danae from Norman, OK
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
timer knob broke off
Ordered the parts on Sunday, received them on Tuesday.
Removed the remaining broken piece. Pushed on the knew knob!
Removed the remaining broken piece. Pushed on the knew knob!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louise from Du Quoin, IL
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
timer knob didn't adavence.
first I'm 77 years old/and prod of myself. I follow google instruction.and did it. washer work like a charm. and it oondly cost me $12.92 with shiping. thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norm from Brilliant, OH
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob was broke
Ordered new knob,came two days later.Really inpressed with their Service.Installed new knob within seconds.Took longer to open the plastic it was in.If you need parts,I would suggest ordering them thru PartSelect.com.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jacquelyn from Bokoshe, OK
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old knob broke
Opened the package - put it on just like the old one. Didn't take 5 minutes. Good as new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howie from Danville, IL
- Parts Used:
- WH1X2754
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Knob broke off. piece of knob plus clip were still on washer.
after seeing new knob and clip, realized to pull old clip off and small piece still on stem. put clip half on new knob, put it on stem. very little room behind it. pushed clip down rest of way with very thin screwdriver. snapped in place. all done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- loring from pine bush, NY
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
knob broke off by clip
watched your video fixed it in a heartbeat I like the site very much also, I looked up the part in a minimum amount of time.I would say it took me 3 minutes total ordering and replacing Loring Gantner
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Russell from Seven Hills, OH
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Old knob broke at the stem.
KNob has gears that mesh with the washer. Simply put on the post and slid the clip into the groves on the stem. Pushed it on with needle-nosed pliers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from Mexico, MO
- Parts Used:
- WH1X2117
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
wouldnt turn to wash cycle was turning manulie
its great and saved me lots of money enjoy my washer again
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Don from Leadville, CO
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Top knob wouldn't turn to select cycles, broke
Tried using 5 minute epoxy to glue gear portion back to knob portion first. That didn't work so I ordered a new one. Piece of cake to install!! Not even 1 minute....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LARRY from AUBURN, IL
- Parts Used:
- WH1X2754
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken knob for washing machine
pulled the clip 1/2 way out inserted knob and it snapped into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Mercerville, NJ
- Parts Used:
- WH1X2721
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastics broke on inside of "Start" knob
Pushed new knob on starter shaft.
Was this instruction helpful to you?
Thank you for voting!