Models > GTW385ASW0WS > Instructions

GTW385ASW0WS General Electric Washer - Instructions

Jump to:

All Instructions for the GTW385ASW0WS
46 - 50 of 50
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ronald from Chickasha, OK
Parts Used:
WH23X28418
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Washer wouldn’t drain
Remove old pump install new one. Three bolts and an electrical connection
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debbie from Kalispell, MT
Parts Used:
WH43X31240
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The washer agitator/auger broke off of the base during a wash cycle. The small plastic clips broke off the auger so it couldn't be put back on the base.
The agitator/auger was easy to replace - it just snapped into place. We watched a YouTube to make sure to lock it into the counter clockwise direction.
This saved lots of time and the cost of a repair person to come.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brandon from Anderson, CA
Parts Used:
WH01X27538
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Clothes very wet at end if cycle
Pulled the washer away from the wall and tipped it back. Removed 3 screws holding the belt cover on. Pulled the old belt off and found it was stretched and coming apart. Put the new belt on the small pulley and put a small screwdriver between the large pulley and belt. Rotated the large pulley to get the new belt fitted. Reinstalled the belt cover and put the washer back. Problem fixed
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Naples, FL
Parts Used:
WH44X24385
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replaced GE Washer lid
Removed parts from old lid (bumpers, switch component and hinges), removed old lid, then replaced parts on new lid. The new lid fit perfectly and looks great.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTW385ASW0WS
46 - 50 of 50