CRE7600ADL Maytag Wall Oven - Instructions

It would've been so much easier if replacement instructions were included. Replacement screws would've been nice also

Unscrewed two screws holding element in place and pulled off the electrical wires to the element.( be sure to remove power to the stove)Put wires on new element and installed screws back in. Done

Shut off electricity to appliance then unpluged wiring from old element and pluged in new element.

After finding out my 2nd hand electric stove was not reaching the temperature I needed to bake my cookies I knew I had to either find out what was wrong & repair it or purhcase another stove. The baking element was the culprit and it was really easy to fix. I disconnected the power line to the stove, unscrewed the old element & pulled apart the contacts from the wires. I then reversed the process and was done in less than 30 minutes. I was extremely pleased with how fast my order was shipped - I ordered the part on Tuesday & the part was waiting for me on Thursday when I got off from work. Will definitely order from PartSelect again!

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires attached to the element, reattached to new element and replaced screws. This was very easy, I was glad I did not call the repairman.

First I turned OFF the elect power to the stove.
Then I got a flash light to see into the oven. removed the two screws, anf pulled the element out far enough to disconnect the two wires.
Put the connecters on the new element pushed it back put the two screws back.
Turned the power on works great, very easy.

very easy

#1...love the website where it helped us diagnose our problem. Also the video where it showed us exactly where and what to do. #2 we accessed the rear of range and unplugged. #3 Took back panel off of range to exposed wires and clips of heating bake element. #4- removed old element from the clips to find that one end was FRIED and FRAYED. Like something burned through the clip. 5- We cut and stripped the end of the hot wire, re-attached the new clip to repaired wire. 6 - plugged her back in...turn the oven on to see that the NEw coil heated up wonderfully. BEST part of the story yet....I placed the order via internet on Monday at 3:45 pm. I paid for the standard shipping of $7.95 or 3-7 day delivery. On Tuesday AM....the very next day, I was WOKEN up by my doorbell at 8:05 AM....by the time I got to the door to see who it was...the FED EX truck was pulling out of my driveway. THEREFORE I got overnight delivery without paying for it. AWESOME delivery, service, transaction....and great website and parts!! HIGHLY recommend to all!!!!

I watched the video intructing the installation of the bake element. The one thing I would suggest is to remove the oven door as this allows someone with a shorter reach to do the repair.

Unplugged stove. Removed door. Unfastened 2 screws at rear of oven. Removed wires from bake element. Connected new bake element. Replaced screws and door. Plugged oven back in.

I ordered the part on Sunday night and it came on Wednesday. I watched the 'Partselect' video prior to doing the repair - the video got right to the repair and it gave me all the information (and confidence) I needed. It took me longer to clean the bottom of the oven than it did to make the actual repair. I can't imagine paying someone to do such an easy job. My kids had a great time playing with the bubble wrap from the box!

Pretty simple, except the element melted very close to one end, so the screw holding the element to the rear of the stove was partly melted also. Had to drill it out & used a nut & bolt to secure the new element.
Apart from that, it was a breeze. As others have done, I re-tightened the lugs that the element plugged into.
Suggest a "test heating" before using stove: mine had a strong odor on first use, fine afterwards

replaced burner element

Removed old element (two screws) unclipped two wires. Clipped the two wires to the new element (one at each end), reinserted new element, replaced the two screws. Done. Oh, flipped the circuit breaker back on:-)

unscrewed the old baking element, took the yellow wire off, and put the yellow wire onto the new baking element and screwed it back onto the oven. Took less than 15 minutes.