KFXS25RYMS KitchenAid Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Myrna from Port Carbon, PA
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
ice maker not working
replaced ice and water filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Woodstock, GA
- Parts Used:
- WPW10498990
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Icemaker stopped making ice
Old valve is working, and I can't find out whats wrong. Looks like I will have to replace the icemaker.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- D J from BOAZ, AL
- Parts Used:
- WPW10498990
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Wrench set
Replace variable speed pulley assembly
The housing bracket assembly didn't come close to fitting my lawnmower. I took the pulley and bearings out of the replacement one and put them in my old housing. This got me back to mowing, but it took quite awhile to make the switch.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Newaygo, MI
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no problem
took old one out installed new turn left out turn right in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marlene from Baltimore, MD
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Indicator light showed Water Filter needed to be replace
Dropped down the housing for the water filter, twisted, removed item and slotted in the new filter. Easy as pie.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louis from Covington, KY
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Ice and Water Filter needed to be replaced.
I snapped the cover plate to the filter open. Pulled the filter down and twisted counter clock wise to take filter out. I installed the new filter in by inserting the filter and tuning clock wise to secure the filter. I flushed the water for about two minutes and then allowed it to be put back into service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cathy from San Pedro, CA
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Water filter needed to be changed
Piece of cake. Took out old filer and put in new one!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROY from SOMERSET, NJ
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Filter Needed Replacement
Opened filter area door turned old filter to the left to unscrew. Took out old filter then replaced the new filter and turned it to the right to tighten it, closed cover and that was it all done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amy from Florissant, CO
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new water filter
So simple I couldn't believe it! Twist out the old filter then twist in the new! Easy Peasy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wilbur from Clayton, NC
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Not Getting Any Water
Thought I needed a new filter. Did not solve the problem. I returned the filter to partselect as per instructions. Will order from partselect when I need parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Roundrock, TX
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
water filter
Easy...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Decatur, GA
- Parts Used:
- WPW10196393
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Food Freezing
Remove plastic vent cover. Just snaps out. Take out two screws that hold damper cover on. Unclip and unplug damper assembly. Snap in new assembly and plug in. Replace covers. I was pretty sure this would fix my problem after observing the damper for several days. It would stay open and when I moved it by hand it would open a little more and then close. Easy fix!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alfred from Erie, PA
- Parts Used:
- WPW10196393
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
noisy
Popped the cover to expose the part. Then removed two screws and unplugged the part. Exchanged the new part for the old. Plugged the new part in and replaced the screws And the cover.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from Bentonville, AR
- Parts Used:
- WPW10498990
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Handel broke at attacth point
R$ R rd the handle pretty easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Valentin from CLOVIS, CA
- Parts Used:
- W10882923
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The ice maker stop making ice.
I looked on YouTube few videos how to replace the ice maker.Then according videos I replaced the ice maker.
Was this instruction helpful to you?
Thank you for voting!