25331640103 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
They Were Missing
Not much placed the 2 ends on the straight bar & put it in place on the refridgerator door dom russo
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Springfield, MO
- Parts Used:
- 240505801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the refrigerator door was hard to close, and upon inspection I finally decided that the light switch was making the door hard to close.
I removed the door actuated light switch with my index finger and thumb on my right hand. I then removed the two wires from the switch. I noticed that the new switch had different look to it,I think Frigidaire must have had a problem with the original design of the switch. Reassembly was just replacing the two wires and putting the new switch in place, and no more door closing problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jodi from Barre, VT
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
End Cap on Bottom Door Shelf Retainer Broke
I took the broken plastic cap off and put the new one onto the retaining bar. Then snapped the the bar into place. That was it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arthur from East Granby, CT
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
End of bracket was broken. Replacement part was perfect.
Simply clipped it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Roseville, CA
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door brace was cracked
Just popped the new piece into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Northbrook, IL
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
End cap broke
Slip the endcap off the door--- no tools required for that. Use flat end of screwdriver to loosen the bracket holding the door bar into the endcap. The bar slides right out, is easily replaced, and the endcap slips right back on to the door.
Was this instruction helpful to you?
Thank you for voting!
Broken door shelf retainer bar.
The retainer bar was missing from a refrigerator in our rental property. A tenant had broken it and thrown it out. I found the model # on the appliance and looked up the parts diagram on the PartsSelect website and found what I needed. I placed the order one day and had the parts 2 days later! Unpacking was the hardest part. The parts just snapped together to make up the complete retainer unit. Then I just fit the unit onto the formed clips on the door shelf. I'd cosider this a " simple" job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Laura, OH
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door shelf retainer broke, I thought about door replacement, all kinds of ideas went through my head none of them fisable, until I happened on part-select my problem was solved.
measured lenght of parts looked at parts available and matched the size and use together slip broken part off door replaced with newpart. reinstall retainer to to door no tools needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alicia from Torrance, CA
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My end cap broke as a result of too many things piled in the door rack.
I snapped out the broken piece of the old Door Shelf Retainer Bar End Cap, snapped in the new one and reinstalled the door rack in my refrigerator.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KIRUBAKAR from CORONA, CA
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Leftside end cap broke and had to be replaced
Removed the broken piece and snapped in the new piece bought from PartSelect. Later connected the bar between the left end cap and right end cap. All done in few minutes. The new piece fitted well into the location with no issues.
Thanks PartSelect
Thanks PartSelect
Was this instruction helpful to you?
Thank you for voting!
needed to replace the end cap on the bottom shelf of the fridge
First I had to remove the popsicle sticks and glue that had been semi-repairing the bracket for 1+ years. Then I popped it back together. Too easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Ventress, LA
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Broken rack railing on my refrigerator door
I found the part on PartSelect.com, ordered it, received it, and installed it in less than 3 days. Thank you PartSelect.com! I wish everything was this easy.
Was this instruction helpful to you?
Thank you for voting!