25331620100 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- KIMBERLY from BROOKLYN, NY
- Parts Used:
- 5303918549
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Wrench (Adjustable)
The freezer portion of the refrigerator worked but the fresh food refrigerator did not
I watched the step-by-step installation video and followed the instructions therein.
Was this instruction helpful to you?
Thank you for voting!
Six of the end caps and four retainer bars were missing on the refrigerator and freezer doors
Basically we put the end caps in place and then inserted the retainer bar into one of the end caps and measured the length needed to make it fit the other end cap. The three shelves in the refrigerator door were the same length. So we measured each one, cut to the correct length and then installed each one. The freezer retainer bar was shorter but we followed the same procedure used for the refrigerator door. It took less than 30 minutes to do all five shelves. It was very simple and easy to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shelly from Junction City, KS
- Parts Used:
- 5303918549
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Evaporator motor needed replaced
When my side by side Kenmore refrigerator quit keeping the top half of my freezer and refrigerator cold I called Sears to see how much it would cost to get it checked out and fixed. Bottom line it was going to cost minimum $65 (which was just for him to come out) to $250 on up depending on what the problem was. So i decided to "do it myself"! I took it apart and within a few minutes figured out that it was my evaporator fan. So I went to sears to order the part based on the part number and with shipping and handling it was going to cost $125. While at sears I got on one of their computers and quickly looked up Kenmore parts and partselect.com came up and I quickly found the part for $62 and I chose overnight delivery and spent a total of like $83. When my part arrived I realized that the wiring/plug ins didn't quite match up. So I got online and went to their website and found a video for "do it yourself'ers" like me on how to splice the wiring to make it match. It took me about 20 min to splice the wire and put my refrigerator back together and IT WORKED! Easy easy easy and I saved moocho bucks! Ill never pay a repairman again. Oh and by the way, I am blond! :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laurie from Meridian, ID
- Parts Used:
- 5303918202
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Refrigerator section warm
My husband watched the video on your website and found it very easy to do the repair. The repair company that diagnosed the problem wanted $210 to do it. The part I ordered was under $20, and after he installed it the refrigerator has been working great. We would highly recommend your site to anyone who needs to fix anything!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maureen from Anchorage, AK
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original end cap had broken
Replaced end cap. Very easy fix. Only took a couple of minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Gambier, OH
- Parts Used:
- 241559801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
light socket burned out
snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jimmy from El Cajon, CA
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Broken end cap for door shelf retainer bar
Ordered part attached part to bar and installed on door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RUTH from AUSTIN, TX
- Parts Used:
- 218396700
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Replace the handle mount
When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.
Was this instruction helpful to you?
Thank you for voting!
Broke end caps when cleaning refrigerator
Slipped the end caps on the bar and reinstalled in refrigerator. Took less thsn 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
Replacing door shelf retaining bars on a frog
There is a local appliance parts store that charges high prices but one can return parts. I ordered 3 things and they got ONE correct. I thought I can do better than this. I went on line and found PART SELECT which provides very good schematics so I could order my own parts with confidence. I got a lll the correct parts, quicker and at a very good price. II have a lot of apartments so this is IMPORTANT to me. PARTSELECT is now my GO To for appliance repairs
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jerry from rohnert park, CA
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lower door shelf retainer bar end cap
my wife did it when I was gone !!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
replaced shelf retainer bar end
I used a screwdriver to open up the slot to be able to press out broken piece of old Bar end and slipped in new part and crimped bar down tight again no problem at all simple job
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Lou from Myrtle Beach, SC
- Parts Used:
- 242120501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cover (shelf) that holds the hydrators was cracked.
Went on line to PartSelect, found and ordered the part. It was here in two days. I removed the old shelf, inserted the new and the frig was as good as new. I was extremely pleased with the ease in identifying the part and the speed of delivery.
Was this instruction helpful to you?
Thank you for voting!
some of the door shelf retainer bar end caps broke
I removed the old ones, and just snapped the new ones on. In no time my fridge was "back to normal" ready to use again... It's as easy as 123!!!!! Thanx for sending me the parts so fast....
Was this instruction helpful to you?
Thank you for voting!