GTS22JBPC General Electric Refrigerator - Instructions

Removed the old part using a phillips screw driver, cleaned the area, screwed in the new part, replaced the drawer. It was very easy to do, didn't even have to call my husband.

Ordered the part on Monday, it was delivered Thursday morning, and installed in less than 10 minutes. Part Select is awesome, would definetly use again!

the slide had broken so ordered ane one according to model and serial numbers..recieved par in 1 day and put it on in less than 5 minutes

Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.

I just took the broken one and replace it with the new one that I ordered. very easy. Thank you!

First I removed the glass shelf on top of the drawer. I then removed the drawer and unscrewed the old drawer rail. After this I cleaned everything, screwed in the new drawer rail, reinstalled glass and drawer and I was finished.

The plastic slide rail that held up the bottom shelf of my frig as well as the top drawer had cracked & eventually broke. Being a widow who lives alone, I knew I could call my son to fix my frig - but I thought, maybe I could do this myself. I found the Brand, Model # & info I needed right on the inside of my frig. I did an internet search for Refrigerator parts, another first for me, found this web-site, then a diagram of my frig, I selected a part & ordered it. When it came in, I had ordered the slide for the bottom drawer & I needed the slide for the top drawer. I called the # from the invoice & got the nicest lady who found the correct part #, ordered it, then proceeded to process the return of the incorrect part I had ordered. The correct part came 2 days later & my credit card was immediately credited after they received the part I sent back. I was so excited to complete the "repair" myself, then with great pride I got my screw driver and changed out 2 screws - "completing my first repair job, all by myself". I diagnosed the problem, ordered the part & completed the repair without help from my family. I was very glad to add this web site to my Favorites. A great big ThankYou to Parts Select !!! Ann Payne

Followed instructions on Installation Video and had no problems completing the installation. This from a 63 year old women!

I replaced the thermostat, temperature sensor, and the run capacitor. . . Refrigerator still not cooling. I checked the start relay and measured the input terminals on the compressor for the correct resistance. . . Everything measured correctly. In a last ditch effort before calling for service, I pulled the main board, inspected it and saw the problem right away. One leg on the compression capacitor had desoldered itself. Got out my soldering iron and applied a good amount of solder to that point. Put everything back together and turn it on. . . Problem fixed. The compressor kicked on right away and started cooling the refrigerator.

pull out the slide pan lh and replace for the part

Removed rer cover, unplugged starter assembly from side of compressor and replaced unit with a new one. Plugged fridge in and it works good.

Removed the old broken one with screw driver and installed new one with screw driver and voila all done!

I unscrewed two brackets on each side (Had to buy the correct little screw driver) and screwed in the new ones.Easy!

Remove entire shelf from refrigerator and removed broke, set the replacement part in place, screwed it in and it worked perfectly, done infive minutes. Took me longer to take out the self that to do the replacement.

Went to Sears, where I bought the Fridge, they could not locate the part I needed, so I went on line, and found partselect.com, entered the proper information, found the part I needed fast, ordered the part, received it in two days time, I already had the old part off, so it took less than ten minutes to replace it with the new part, works great, the people at partselect.com were great, an if needed, I will gladly order from them again.