Models > LGTR1842TE0 > Instructions

LGTR1842TE0 Frigidaire Refrigerator - Instructions

Jump to:

All Instructions for the LGTR1842TE0
61 - 75 of 113
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
R E from Clovis, NM
Parts Used:
240358926
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken bracket for drawer
Installed new shelf, put drawer in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Grant from Apache Junction, AZ
Parts Used:
241554901
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Light Would Not Come On.
I removed the four bolts holding the light switch and temp knob with a nut driver, unplugged the unit and moved it to the table top. I removed the switch and replaced it with a new one. I plugged the unit back in and drove the four screws in with a nut driver and the light now comes on when I open the door. Real simple!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Laurie from Chicago, IL
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken shelf glass
Insert the replacement glass shelf in my refrigerator. Installation was very easy and simple, no tools needed.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joe N from Alliance, NE
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Crisper's Glass Top Broken
Placed glass into front edge of frame first then gently lower the back side down into position
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Racine, WI
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My daughter purchased a home and the refrigerator was included in the sale. Unfortunately the shelf was missing.
I removed the shelf and placed in the crisper frame.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bia from Rochester, NY
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The glass shelf crashed and burned.
It was as easy as pie. We just carefully slid the shelf into place. That was it.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Admirald from North Lauderdale, FL
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
crisper glass shattered while cleaning
Insert new glass into slot. Took less than 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joel from Wilmington, CA
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broke my shelve glass
Ordered glass from Parts Select on Saturday , was delivered Tuesday , snap it on and that was it... No need to buy new fridge .. Awesome !!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wanda from Deer Park, WA
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken glass insert
Only required opening the box and inserting the glass shelf into the shelf frame. I was very impressed with the quick delivery and quality packaging. The website was extremely easy to maneuver.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Bethel Park, PA
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken glass shel
After removing the broken glass, the new shelf slid into place easily. I only had to make sure it rested in the front slot that prevents it from sliding. The ordered shelf arrived within 4 business days and was perfect in all ways.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leslie from Staten Island, NY
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The crisper glass shelf shatter when trying to clean it.
The repair, if you want to call it that, was a complete no-brainer. The glass slipped right into the shelf. No tools were needed. I was afraid that the glass might break during shipment. However, it was packaged and secured several times over that it was in no danger of breaking during delivery. The part came sooner than I anticipated. I am extremely pleased with this order.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jesse from Woodstock, GA
Parts Used:
242252603
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Valve nut stripped
Old part threads : made in China (brass) New part : made in Mexico (steel). First, unplugged it from the wall. As for the valve, removed the two screws holding the valve in, disconnected the plug, took the pipe cutter, cut the blue line to the ice maker, cleaned up the cut, pushed that line into the new one and reassembled. Done!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frank from Glen Allen, VA
Parts Used:
242252603
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
ice maker will not make ice
Installed new fill valve in less than 30 minutes and waited for 24-8 hours for results to no avail. Ice maker mechanism was shot and still would not work. Went to Lowes and bought entire ice maker add on kit for my model ice box and installed in 30 minutes and have been making ice ever since. Your 99% cure rate was 100% incorrect. Save the time and effort and go to a big box store and just get a new ice maker. By the way, it only costs about $20 more to do that.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alejandro from Auburn, AL
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
crisper glass broke in thausand peaces
it was easy my wife did it wen i went to the fridge it was already installed. thank you!!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brenda from Marblehead, MA
Parts Used:
5303918824
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Handle had broken at the top where horizontal part joins vertical
The repair only involves two sets of fasteners. I am a very unskilled female repairwoman and found the top two screws easily undone with a Phillips head screw driver. I did not understand how to undo the bottom fastener which was a circle with an empty center, so I took the new handle to the local hardware store where a nice employee found me an Allen wrench for 47 cents. My only request would be that the instructions had said that was needed along with the correct size. Otherwise it went very smoothly.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LGTR1842TE0
61 - 75 of 113