RVM225BLC01 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Terry from Justice, IL
- Parts Used:
- WB36X10003, WB08X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
bulb burned out -cracked holder lamp
pluged wires back on ,placed lamp holder and bulb back and replaced screws
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Marina Del Rey, CA
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light bulb wouldn't light.
Removed difuser (one screw), removed old bulb, screwed in new bulb, replaced difuser.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leon F. from Brookline, MA
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Right hand surface lamp burned out. It apparently fald up and broke the glass cover. I wne on line when I found out the only local deaaler was some miles away and more expensive.
Simple. The parts came instantly. The glass was too big so I had it cut to size. I unscrewed the fixture with a screw driver replaced the bulb and slipped the glass cover into the frame and screwed the whole assembly in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JAMES from PISGAH FOREST, NC
- Parts Used:
- WB06X10140
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Bent, Broken, Melted rack support
Ordered new support (price was less than Postage) Ordered for Microwave, should have ordered for Convection Microwave. Filed side SS to fit part ordered, after much filing got the new part (wrong) into the side panel. Looks great, wrong color but should be OK/
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Cumming, GA
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Quick and easy
Took a total of 5 minutes to replace the handle including going and getting the philips head. Unscrew from inside door and replace. Piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lois Jane from Fernley, NV
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
light bulb burned out
took out several screws dropped down the panel under the microwave and unscrewed the bulb and put the new one in. It was a simple job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Shawnee, OK
- Parts Used:
- WB24X829
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
time would count down but unit would not run & heat.
remove cover, unplug secondary door switch (top switch)
remove switch from holder, install new switch, plug in wires, replace cover, very easy. door switches are a common problem
with microwave ovens.
remove switch from holder, install new switch, plug in wires, replace cover, very easy. door switches are a common problem
with microwave ovens.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arthur from Lincoln, MA
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Original handle broke at the bottom fasten point
I unscrewed the remaining stubs and replaced the handle. Unfortunately, despite care, I was unable to tighten the top screw sufficient to seat the handle securely against the door. I fear the new handle will fracture.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Waldorf, MD
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Interior Light Out
Removed Cover Plate,
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nadine from St. Louis, MO
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle to the microwave broke off from the bottom
I removed the original handle by removing the two screws . Then I attached the new part using the same screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gail from Flemington, NJ
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door handle broke off.
First, I have to say I was amazed at how quickly we received the replacement part--it cam the next day and I didn't pay for extra shipping. Of course, this was a quick replacement part, since I only had to remove the two screws holding the old broken handle and install the new one. My husband couldn't believe it was already done the next day--we figured we wouldn't be able to open it for at least a week. Thanks! Also, it was easy to find the part on the website.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sarita from Brooklyn, NY
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
handle on door broken
I unscrewed the one screw holding the handle but had to use a plier on the other screw because the screw was stuck in a small piece of plastic that had broken off the handle so I held the plastic piece in place with the plier and turned the screw with the screwdriver and then it came right out
I then just screwed the two old screws right back in to the new handle and it was done!
I then just screwed the two old screws right back in to the new handle and it was done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Neenah, WI
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Door Handle
Super easy repair, getting the part was just as easy. I did a simple search with the model number and was able to verify that the part I was ordering was the correct one by using the many pictures and diagrams available.
Thank you for providing such a user friendly site as I hate sending stuff back. Although I hope my appliances last a long time if I ever need repair parts again you can be sure that I'll use this site.
Thank you for providing such a user friendly site as I hate sending stuff back. Although I hope my appliances last a long time if I ever need repair parts again you can be sure that I'll use this site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Alpharetta, GA
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The screw holder on the microwave door broke
I was very concerned that I would have to buy a new microwave because the door handle broke. It literally took 2 minutes to find on google, shipped overnight and fixed in 5 minutes for under $50! Woo hoo!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ralph from Shelton, CT
- Parts Used:
- WB15X321
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The handle for our microwave broke off after 13 year s of daily use.
It took about 3 minutes to install this handle. Only two screws and it was done. Thank you for having this part in stock, as the microwave is still in good shape after all this time.
Was this instruction helpful to you?
Thank you for voting!