YWET4027HW2 Whirlpool Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from WEST CHESTER, PA
- Parts Used:
- 279769
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Dryer Ran -No Heat
Watched video on locating and testing parts (did help that I had a digital meter w/cont-tone ) removed and cleaned out dryer cabinet tested heating element-was ok went to thermal cutoff (tested bad ) ordered kit from part select parts arrived within two days (fantastic ) replaced parts in thermal cut off kit . Replaced dryer back also and important -removed dryer vent and cleaned out pipe -replaced vent pipe turned on the power tried dryer works like new again your easy to follow instructions made this a very easy job thanks people ! You saved me a great deal of aggravation and more important money
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Greencastle, PA
- Parts Used:
- 279769
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
no heat dryer
diagnosed problem with ohm meter. replaced thermal cutoff and hitemp thermostat
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Ballwin, MO
- Parts Used:
- 279769
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
Dryer would stop heating. Would reset after several hours and work again.
I knew I needed a thermostat. So that part of the repair was my contribution.
Was this instruction helpful to you?
Thank you for voting!