LSG1000T Maytag Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Eric from Sussex, WI
- Parts Used:
- 12001541
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
rollers squeak
Removed the front of the dryer, removed the belt and took out the tub. Replaced the rollers (super easy) and put everything back together. Too easy!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Chadds Ford, PA
- Parts Used:
- WP312535
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench set
worn roller wheel and bearing
replaced worn parts
Was this instruction helpful to you?
Thank you for voting!
The dryer was making a loud noise. I dos some research and took off the front and the noise was coming from the support wheel.
I first went online for instructions. I then went to home depot to find the part, but they didn't have it. They recommended an appliance store, called them and they were getting ready to close and wouldn't stay open 5 more mins for a customer- so I ordered from you guys. The part came on time and fit perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Arlington, TX
- Parts Used:
- 306508
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
This old dryer was making a scraping noise
I removed the front panel, drilled out the worn glider plate's rivets and riveted the new plates on. It was easy. However its too late for this worn out dryer. I've replaced, belts, pulleys, wheels, gas valves, ignitor elements, humidistats, lamps, felt rings, and even the whole motor. This baby has just seen too much action and its time for a new dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eben from Clinton, CT
- Parts Used:
- 306508
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
drum turned wit dificulty
Followed the directions in your video. ( should have viewed it first as it would have saved me time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Hopewell, NJ
- Parts Used:
- 12001541
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
Grinding during operation.
This repair is very easy. The video on partselect.com explains exactly how it's done. My only difficulty was getting the belt back on the tensioner (which incidentally the partselect video described as the only difficult part of the repair.
I wasn't able to get the belt on the tensioner when the pulley was under tension from the spring. After a few minutes of frustration, I unhooked the spring from the pulley, put the belt on the pulley and pretty easily reattached the spring.
The dryer now operates quietly and perfectly. Amazingly this maytag is drying clothes for it's fourth generation in my family. I'm glad it was such an easy and inexpensive repair.
I wasn't able to get the belt on the tensioner when the pulley was under tension from the spring. After a few minutes of frustration, I unhooked the spring from the pulley, put the belt on the pulley and pretty easily reattached the spring.
The dryer now operates quietly and perfectly. Amazingly this maytag is drying clothes for it's fourth generation in my family. I'm glad it was such an easy and inexpensive repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- PATRICIA from VIRGINIA BEACH, VA
- Parts Used:
- 12001541
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
dryer was making a noise at start up
I followed the video on the site for the most part. My neighbor helped me maneuver the drum. The noise stopped after the repair that day, but unfortunately it started up again a few days later. Now it is intermittent. I don't know what the problem is :(
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Todd from Toms River, NJ
- Parts Used:
- 12001541
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
replaced belt and rollers
Heard a loud squeaking noise in dryer. I changed the belt first which was cracked and worn. The dryer noise did improve, but was still present. I then replaced the rollers and now it runs very smoothly. Should get another 25 years from it. The Instructions for installation were very helpful and easy to follow.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- VICTOR from EAST MEADOW, NY
- Parts Used:
- WP6-3129480, 12001541
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench set
roller shaft making noise and worn out
first i disconect the power , then I
removed the two screws that hold the front door
panel. screws located at bottom of the front door panel.
i removed roller shaft with no. 13 wrench and install new one
removed the two screws that hold the front door
panel. screws located at bottom of the front door panel.
i removed roller shaft with no. 13 wrench and install new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dana from Naples, FL
- Parts Used:
- WP6-3129480, 12001541
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
loud thumping noise
The replacement dryer drum wheel was easy to find on Parts Select website. Easier than the replacement of the part! After finished everything was quiet again and running great now. I would definitely use this site again in the future.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from Bath, MI
- Parts Used:
- 12001541
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Squealed like a banshee!
Removed front panel, removed drum, replaced drum support rollers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Wichita, KS
- Parts Used:
- WP6-3129480, 12001541
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench set
Making load noise when running
I removed front cover and disconnected door switch as I supported drum and put a coffee can to hold drum in place and then removed old support rollers and one shaft and then put all compents back together
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fredric from Moorestown, NJ
- Parts Used:
- 12001541
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
dryer squeaking
took dryer apart after viewing video. Found problem to be wheel on tension part holding drive belt in place. Used wd-40 to clean plastic wheel put dryer back together problem solved
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- fred from janesville, WI
- Parts Used:
- 12001541
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
noisy drum
used the drum support roller kit an easy fix to a noisy problem
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Franklin, TN
- Parts Used:
- WP6-3129480, 12001541
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench set
Inconsistent squeal
I followed the instruction video on the Partselect.com website exactly except that I accessed the tensioner pulley through a panel on the rear of my dryer. Very clear and concise.
Was this instruction helpful to you?
Thank you for voting!