This OEM drum support roller kit contains the parts needed to replace one roller on your dryer. This kit includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once for optimal performance. The drum support roller holds the drum in position while it spins on the support wheels. It rotates on the roller shaft located on the rear bulkhead. It may need to be replaced if your dryer is noisy, will not tumble, leaves marks on clothes, or will not start. This part is prone to wear and tear, and if broken will need to be replaced. This part measures roughly 3 inches in diameter and is made of plastic, metal, and rubber. Each kit is sold individually (two would be needed to replace both drum support rollers, which is recommended).
Works with the following brands:
Maytag, International, Jenn-Air, Crosley
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Noisy, Drum Not Spinning, Marks left on clothes
Part# 12001541 replaces these:
AP4008534, 400518, 12001541, 12001541, 12001541VP, 3-3373
...
Show more, 303373, K35-248, W10116741, Y303373 Show less
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Solomon
June 16, 2022
Dryer makes a huge noise. Was told it is probably the blower wheel. Problem is I believe there are two models which both claim to fit this model. One is threaded and one, not. How do I know which one to order?
For model number MDG8426agw
Hi Solomon,
Thank you for your question. Both blower wheels are threaded. If your blower wheel has a d-shaped shaft, you will need to order part number FIX2035614. If your wheel has a threaded drive hub, you will need to order part number FIX11741126. If you need help placing an order for one of these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
The roller shaft is also known as a support roller shaft or a drum roller axle. It is a part in your dryer that the drum rollers spin on, helping your dryer to tumble. If your appliance is noisy while operating, or will ...
This part is located on the front bulkhead of the dryer and helps the drum to rotate smoothly and quietly. If you notice a screeching or metal-on-metal noise while your appliance is operating, you may need to replace the...
This is a single OEM dryer drum belt. It measures 100 inches in length, 3/8 of an inch wide and has five ribs and four grooves. Keep in mind that this rubber drum belt will stretch over time, so if you are comparing your...
If your dryer is noisy while operating, or will not tumble at all, there may be an issue with the drum belt. Over time, the rubber can become brittle and snap, and the belt will need to be replaced. This genuine OEM mult...
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or ...
If your dryer is making excessive noise, or it will not tumble, there may be an issue with the idler pulley wheel. The idler pulley wheel is attached to the idler bracket and is used to secure the dryer drum belt, which ...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.0 / 5.0, 65 reviews.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Disconnected power supply, removed front panel, removed tub support bracket, removed electrical lines from light and door switch( to have better access to install front guide kit), removed belt, removed drum, removed old rollers, installed new rollers and rest of installation was in reverse order of taking machine apart. In order to insta
... Read morell the front guide kit(which I've never done before), I had to watch the installation instructions via you-tube. This was a tremendous aide as the instructions were simple and very adequate.
Dryer was a bit noisy with a full load of wet clothes
As per the repair videos on the site, I searched the internet for a couple of supplementary videos just to make sure I was doing it correctly. It was was all pretty easy. Expect to vacuum out and clean out the interior of the dryer. Also, to make things easier, disconnect the bulkhead and exterior like in the video, but also keep the top
... Read moreflipped up until reassembling, it'll make it much easier. When reinstalling the belt, remember how the belt is going to go around the pulley, you'll have to do this without sight as the barrel will the way and you won't be able to see what you're doing. It's really not hard but just keep this in mind. Also, as you disassembling, it would help to snap some pictures of where each screw goes and how; reassembly was a tiny bit tricky as I didn't do this.
Followed youtube tutorials, pretty straightforward. Take pictures of where wires connect for door switch, light, et al. Have a shop-vac handy to vacuum all the dust, lint, dog hair, etc that's accumulated over the years inside the unit.My spreader c-clip pliers were not small enough to fit in the holes of those tiny c-clips,had to improvi
... Read morese.Used steel wool to polish all roller shafts, Before re-installing drum and belt, orient yourself to this procedure by practicing threading belt properly before positioning the drum in your way!
I followed the instructions on each part that was sent to me. I've taken the front and tumbler assembly off before, so that was already easy. The tip that is not offered that makes a huge difference in replacing the belt is this. Make sure that you take the belt out if the bag and let it rest for a few minutes before installing. Also, m
... Read moreake sure that you have the ribbed side of the belt facing up on the tumbler. It is easier to get it right while the tumbler is out of the unit than when it's inside and you are working in a 1 foot section.
I followed the video instructions, which were great by the way. Pretty easy to remove the front panel, then housing, then belt, then drum to expose drum support rollers and shafts. Removed old and replaced with new after cleaning lint up a bit. Unfortunately, there is still a bit of a rumble when the drier starts up. I fully expected
... Read morethe changed out parts to make a difference, but it was only a modest improvement. I need to do further trouble shooting and diagnosis.
Replaced the wheels at the back and also the belt. ( I also removed the lint buildup around the drum felt and on the heating chamber and motor. That alone helped the noise problem. I did this prior to ordering parts, as I had taken it apart to see what the problem might be.)I don't have any additions to what I saw in the repair video. Tha
... Read moret video showed me all I needed to do. Great video. First time the dryer has been worked on since it was purchased in about 1984. We were a family of 6, so its good stuff.
For belt installation, I found that pushing the belt rearward into the drum roller groove made it much easier to get the belt over the idler pulley. Once I had it over the idler pulley it was a simple matter to slide the belt forward into it's normal operating position.
Watched 2 YouTube videos. 1. How to take apart a dependable care dryer. 2. How to replace a belt on a maytag dryer. We replaced all the parts. It was eeasy. When putting dryer back together make sure felt is straight. We did have to take it apart again there was felt sticking out inside the dryer and it caused the drum to not spin. Every
... Read morething works great. And Thank you parts select. I received the right parts in 2 days without paying extra. I will use you again.
The roller bearings worn out causing belt to break
First thing was to watch this video on Youtube on the take down of this dryer and determine what caused the malfunction.
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(10 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roland F - September 3, 2020
Verified Purchase
Excellent buy!!
Smooth- good deal
★★★★★
★★★★★
Michael A - September 29, 2021
Verified Purchase
Perfect
Parts arrived in timely fashion. Contained everything necessary to repair dryer.
★★★★★
★★★★★
Thane R - March 16, 2022
Verified Purchase
Squeaking No More!
I’ve made a few repairs to my old Maytag dryer. I knew I was going to be replacing a few things and my old roller bearing was seizing and squeaking. I ordered this part and replaced it fairly easy. There is a little clamp that holds the roller on that was a bit of a pain without proper tools. I did get it though by using a flat screwdriver and prying towards me to pop it off. Ever since replacing the part, I no longer have a noisy dryer.
★★★★★
★★★★★
Larry G - July 15, 2024
Verified Purchase
Easy
It was easy my 12 yr old helped me.
★★★★★
★★★★★
David D - June 24, 2020
Verified Purchase
Harvey home.owner
Was the exact replacement part
★★★★★
★★★★★
Jason H - February 5, 2020
Verified Purchase
Noisy dryer? Here's a fix
Opened up my dryer and found out one of my rollers was rusted out. Greased up the shaft and put on this roller. Keep in mind your dryer might need two new rollers, mine had one good and one bad. After watching DIY YouTube videos I put this together myself in a couple hours.
10/10 dryer runs how it should, quieter than ever!
★★★★★
★★★★★
BILL H - July 15, 2020
Verified Purchase
DRYER ROLLERS
A-OKAY
★★★★★
★★★★★
Jeffery C - September 11, 2019
Verified Purchase
Perfect
Work perfectly just replacing the right hand bearing. Squeak removed. Very quiet.
★★★★★
★★★★★
Andrew E - December 12, 2019
Verified Purchase
Arrived sooner than anticipated!
The part arrive two days earlier than shipping expected and was a perfect fit. No more howling clothes dryer.
★★★★★
★★★★★
Jeffrey I - September 4, 2021
Verified Purchase
Easy
Worked as it should. Easy repair.
Model Compatibility
This part works with the following models:
Fix Number: FIX1570070
Manufacturer Part Number: 12001541
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
