11066712693 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Pat from Zebulon, NC
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The clip that holds the plastic handle to the lint screen broke off.
The new lint screen fit perfectly. All I had to do was slip it in the lint filter slot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melia from Quincy, FL
- Parts Used:
- WP3395385
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
dryer would not start after another repair
well the problem wasn't the start switch, it was the thermal fuse and thermometer. they blew because I didn't screw them back onto the blower housing after the motor and fan repair. However, start switch repair was very easy. unplug dryer, pull off the plastic start button, unscrew the back top panel using a 1/4 inch socket wrench (I think this is what it is called). once inside, the start switch is located at top left. need to pull the top clip with your thumb or finger while twisting the connector to the left, it comes right out. change out the start switch and reassemble. Videos located on youtube. I have changed out 12 parts (2 rollers, 2 shafts, start switch, idler pulley, belt, rear felt seal, motor, blower fan, thermal fuse and the cycling or initial bias thermometer) on this dryer in past couple of months for a squeaky dryer, dryer still squeaking, dryer won't run at all, etc. all videos were located on youtube most by partselect. motor and blower fan were the initial problem and then Then the thermal fuse and thermometer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Billerica, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint screen was worn and not working properly
removed old screen and replaced with new one.I would like to add that PartSelect was the only place i could find the part at a reasonable price, and that it was delivered in record time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Burlington, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old filter broke
took out old put in new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Dudley, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter handle broke
Slid the new lint filter into slot on top of my 26 year-old Kenmore dryer and it fit perfectly! Ordered part and received it the next day...unbelievable!! Definitely A+ service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Palatka, FL
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced lint filter
The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from York, PA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old lint filter was broken
All I had to do was take out the broken filter and replace it with the new one. It fit perfectly. The replacement took less than 5 minutes. I should have done it a year ago!!
Was this instruction helpful to you?
Thank you for voting!