11066712693 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Maura from Burbank, IL
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen was broken - replaced it with a new one.
There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from KOKOMO, IN
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke
Placed lint filter in opening and pushed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy (Hairways) from WOODMERE, OH
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Monroe, NY
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint filter handle broke off
the replacement part fit perfectly, as I thought it would given another repair story. The repair took less than a minute to take the old one out and put the new one in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Lewisville, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer not drying clothes
By simply replacing the lint filter our dryer now dries clothes in less than an hour like it did when it was new.
Prior to replacing the filter it would take 2 hours to dry a load of clothes.
Prior to replacing the filter it would take 2 hours to dry a load of clothes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carrie Eplen from Kingsland, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken handle
removed old unit and replaced with new. perfect fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howard from Boynton Beach, FL
- Parts Used:
- 350930
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- bryan from austin, TX
- Parts Used:
- WP3395385
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
dryer would'nt start
jumperd old switch,unit started normaly. installed new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Highland, IL
- Parts Used:
- WP3395385
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Dryer would not start
Removed rear cover from control panel -- used voltmeter to confirm that push-to-start switch was no longer functional -- ordered new switch from website (really easy!) -- removed wires from old switch, noting locations -- removed old switch by releasing locking tab with screwdriver and then twisting switch CCW -- installed new switch by inserting and twisting CW until tab locked in -- replaced wires -- replaced rear cover.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Calvin from Saco, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter was broken
Tried to replace filter would not fit It was delivered outside and was real cold and stiff after I let it set for awhile it warmed up it fit great. Thank you Calvin
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pat from Zebulon, NC
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The clip that holds the plastic handle to the lint screen broke off.
The new lint screen fit perfectly. All I had to do was slip it in the lint filter slot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melia from Quincy, FL
- Parts Used:
- WP3395385
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
dryer would not start after another repair
well the problem wasn't the start switch, it was the thermal fuse and thermometer. they blew because I didn't screw them back onto the blower housing after the motor and fan repair. However, start switch repair was very easy. unplug dryer, pull off the plastic start button, unscrew the back top panel using a 1/4 inch socket wrench (I think this is what it is called). once inside, the start switch is located at top left. need to pull the top clip with your thumb or finger while twisting the connector to the left, it comes right out. change out the start switch and reassemble. Videos located on youtube. I have changed out 12 parts (2 rollers, 2 shafts, start switch, idler pulley, belt, rear felt seal, motor, blower fan, thermal fuse and the cycling or initial bias thermometer) on this dryer in past couple of months for a squeaky dryer, dryer still squeaking, dryer won't run at all, etc. all videos were located on youtube most by partselect. motor and blower fan were the initial problem and then Then the thermal fuse and thermometer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Billerica, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint screen was worn and not working properly
removed old screen and replaced with new one.I would like to add that PartSelect was the only place i could find the part at a reasonable price, and that it was delivered in record time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Burlington, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old filter broke
took out old put in new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Dudley, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter handle broke
Slid the new lint filter into slot on top of my 26 year-old Kenmore dryer and it fit perfectly! Ordered part and received it the next day...unbelievable!! Definitely A+ service.
Was this instruction helpful to you?
Thank you for voting!