11066712693 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jason from HUDSON, OH
- Parts Used:
- 279872
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dryer wouldn't shut off
The dryer would dry the clothes fine and run through heat cycles and cool down. The timer would also run down, it just would stop even thought the heat stopped. To repair, I took the back off the timer portion of the dryer. At first I panicked. I did not see any part that looked like the new one I just ordered. I searched the internet and found that the original part looked like a black plastic loop with a black and orange wire connected to it. The part I got was the new design. Then I couldn't figure out if it mattered which end I hooked to the black wire. Another internet search showed it doesn't matter which way current flows through a resistor, so it didn't matter. Hooking in the new part was very easy. The time it took to get the information to identify the part, and determine if it matter which end to hook up to which wire took the longest. I would recommend PartSelect put a picture of the old style right beside the picture of the new style. Also would like them to make clear it doesn't matter which direction the Timer Power Resistor went in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from POLAND, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint filter cracked
Removed old filter, replaced with new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Benjamin from Pinos Altos, NM
- Parts Used:
- WP3395385
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Dryer just stoped
Even with the power left on, I used some insulating pliers and carefully pulled the 4 wires off what I thought might be the problem switch.
It was not the problem. They dryer still does not run. Something else
It was not the problem. They dryer still does not run. Something else
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jean M from CHESAPEAKE, VA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint would no go throw
Received the new lint removal from the box and install it easily
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from LONG VALLEY, NJ
- Parts Used:
- WP3395385
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
2 dryers just stopped
it didnt work first step though im not a pro so i really dont know whats wrong its worked in the past but not this time i actually tried
to repair mine and a friends that conked out the same week. NO GOOD with both new start switches. one was a push and the other a turn. bummer !!
to repair mine and a friends that conked out the same week. NO GOOD with both new start switches. one was a push and the other a turn. bummer !!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLIAM from SEBASTIAN, FL
- Parts Used:
- WP688805
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
The dryer nob wasn't working the dryer knob broke off inside the unit
It was very easy to install the new parts successfully thanku parts select I will always keep using your business the representative was so helpful and understanding my problem I wish I could remember his name he was outstanding and a 100 thumbs up to him
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stacey from Corinth, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the handle had broken on the lint filter so i had fashioned paper clips into the holes to get the filter out
after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- West from Montgomery, AL
- Parts Used:
- W11778253
- Difficulty Level:
- Difficult
- Total Repair Time:
- 15 - 30 mins
The handle would not seat" , with the old dryer lint slot. Had to remove the handle and leave the medal holder , to which the handle was popped on, by slot and hooks.
I inserted the sharp kniife point, pryed back a flap , thus releasing the nylon locking hook, in the slot. then did the other side...I removed the white plastic handle, leaving the metal frame, which lay more flat in the filter channel. I put a box of screws on top of the dryer flap to keep it snug.. this is a Kenmore about 15 years old.
Grahare
Grahare
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from KOKOMO, IN
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke
Placed lint filter in opening and pushed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy (Hairways) from WOODMERE, OH
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beatrice from WALTHAM, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced the dryer lint screen filter
removed the old damaged filter and replaced with the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marilyn from HORNICK, IA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint collector was cracked and I was unable to insert easily.
Simply removed old dryer lint collector and installed the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Anaheim, CA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken handle on lint filter
received part 4 days after order. very pleased about that! Local Sears Service center was out of stock.
carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.
carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carmen from CUSHING, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Had a torn lint filter
Removed replacement from box. Threw old one out, the new one fit perfectly, and securely.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maura from Burbank, IL
- Parts Used:
- W11778253
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen was broken - replaced it with a new one.
There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Fast efficient delivery from Parts Select.com.
No need to publish this I'm sure.
Was this instruction helpful to you?
Thank you for voting!