Models > CDM2000RW459 > Instructions

CDM2000RW459 General Electric Dryer - Instructions

Jump to:

All Instructions for the CDM2000RW459
91 - 105 of 117
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michell from Bellefontaine, OH
Parts Used:
WE25M40
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Loud Sqeaking noise
the replacement part was easy to replace but remembering how the belt went back on took alittle more time..
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Mansfield, MA
Parts Used:
WE11M23
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
dryer was not heating up
Had to remove the drum to get at the heater element also had to swop the sensers to the new element
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from Mercerville, NJ
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Plastics broke on inside of "Start" knob
Pushed new knob on starter shaft.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JEAN from POPLAR GROVE, AR
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
selector knob was striped out
Just took the old knob off and put the new knob on. It was a snap. Thanks you very much
Was this instruction helpful to you?
Thank you for voting!
Customer:
bradley from noble, OK
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
on/off knob cracked and would not turn on the dryer
put the new knob on and pushed it inward !! simple repair..PartSelect is a great company to do business with and very quick shipping, and great prices too. thank you so much.Brad S.
Was this instruction helpful to you?
Thank you for voting!
Customer:
June from Port Charlotte, FL
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Start knob broke
It was only a matter of putting a new knob in place of the broken one. No tools required.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Bakersfield, CA
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Dryer Start knob broken inside of stem.
Knob stem was split, leaving the metal bushing on the dryer's Start switch. Used pliers to remove metal collet. Aligned new knob to switch, and firmly pushed replacement part into place. Tested results and found it to be satisfactory.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from Redondo Beach, CA
Parts Used:
WE1M1011
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
dryer door would not stay closed
inserted the latch into the opening in the front face of the dryer
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Upper Marlboro, MD
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken dryer selector knob
I opened the box which contained the new selector knob. Placed it on my dryer and immediately turned the knob to start the dryer. Easy steps to follow the video supplied when i ordered the part. I am greatful you responded to my order within 3 days. Thanks
Was this instruction helpful to you?
Thank you for voting!
Customer:
Fawn from Loganville, GA
Parts Used:
WE1M1011
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dryer door would no longer shut.
Simply popped the old broken part out and popped the new part into place. I wasn't sure if it was the Latch Door or the Door Strike. Once the parts arrived, it was clear the Door Strike was not the issue.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Orange, CA
Parts Used:
WH1X2721
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken knob
Simple replacement. Very easy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Arlie from Ringoes, NJ
Parts Used:
WE1M1011, WE1X1192
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Door would not close
Removed door strike and latch, replaced, works like new.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CDM2000RW459
91 - 105 of 117