GLEQ332CAS0 Frigidaire Dryer - Instructions

I used the posts on the site to ascertain the problem (fuze or element burnt out). The pictures were very helpful. I pulled the dryer to the floor and using my meter checked both the fuze and the element. The electrical diagrams were very helpful also. I took the dryer apart further to make sure the coil was indeed the problem. I then ordered the part!

Removed obvious screws to the vent etc. Then had a little trouble getting the cabinet open. My only problem was getting the front top panel off. A clip about 2" from either side at the top needs to be pushed in with a flat head screwdriver to release the top. Other than that the task was pretty straight forward. Two sets of wires to the heater itself. Used pliers to help pull them loose.

My Son-in law did the repair. He removed the top, the front lower panel and finally the front panel with the door. It took a little more time than anticipated because there was not any explicit directions on how much to remove to replace the belt, but he got the job done and put it back together very quickly. Glad I have him to help when needed:).

The dryer was heating but the drum would not turn. We opened it up to see what the problem was. As soon as we opened it, we saw the belt was broken. I ordered a new one and after two trips to the laundromat I was ready to get the dryer fixed. That weekend we tackled the job. First I did a Google Search on Westinghouse dryer repair, found several ....one with a video:-) Punched in our model number and they went through the whole procedure....while it took them only 10 minutes, we took a little longer. But they had great ideas how to hold the drum while repairing, etc. Being recently laid-off this was a fantastic find. I have no idea how much a service call would be on the dryer nor could I afford a new one at this time.... Great old American Know How got it done.

Simply pulled the old knobs off & put the new ones on.

It is disappointing that the knobs cracked at all. I guess all the repair guys who've come out since our kitchen remodel are right - nothing lasts anymore & expect a repair within 5 yrs.

I ordered on a Monday & the knobs were delivered the next day, even though I chose only standard shipping. I was very, very pleased with PartSelect.com.

Very easy, slipped the old one off and placed the new one on

This was the greatest part ordering experience I think I have ever encountered.

No problems with ordering, arrived on time and works beautifully.

Removed the timer know and inserted the new one in its place. less than one minute work.

Excellent response and fast delivery from Parts Select.

Will use again, if necessary.

well guys replacing the knob was no big deal, but i initially thought that the timer was bad. i jumped the gun and ordered the timer on a wednesday and discovered on thursday upon further investagation that the back of the dial shaft was cracked creating the whole problem, so i ordered that and everything is fine once installed (& the timer is on the way back). my advice is check thoroughly and order once, you get less laughter from your wife on this one. thanx mcsgt(robert)

I replaced this belt once before but it squeaked for over a year. This belt from Part Select was much better quality and now the dryer works perfectly, no squealing!

I simply put new knob on the little metal post where it belonged. Simple as pie.

i order the part on line came within 2 day push on knob that easy.

Slid new knob on shaft. Done.

Purchased new knob and put in place this company was great received with a day or two

Ordered the knob, received it immediately, pushed the knob on without the assistance of any tools. I am handyman challenged sothis was a huge accomplishment for me. Thanks!

ordered part, 4 days delivery, snap on. DONE