Models > GLEQ332CAS0 > Instructions

GLEQ332CAS0 Frigidaire Dryer - Instructions

Jump to:

All Instructions for the GLEQ332CAS0
76 - 90 of 245
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from Dayton, OH
Parts Used:
134813601, 134503600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Original drum belt broke
Watched the online video that showed how to replace the part. Was very easy to follow, but also I did open the inspection plate on the back to make it easier to put the belt on also to make sure that the spring and everything else look okay. As for the door switch took a photo with my phone of how the wires went on remove the wires, popped the old switch out put the new one in put the wires right back up the same way in my photo works perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from UXBRIDGE, MA
Parts Used:
134503600
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Broken belt
Watched video sent to me after I purchased belt on line. Super helpful!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ann from WALLA WALLA, WA
Parts Used:
134120900
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
lack of heat
Followed the video
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allan D from REDLANDS, CA
Parts Used:
137551901
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
the attached anchors and holes linled up about 80% of the time.
I cut off the four that didn't line up - I suppose since this was a gasket that fit several makes, I should expect this type of problem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Angela from WALLOPS IS, VA
Parts Used:
131873500
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Timer knob broke
Easy as 1-2-3!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DEBRA from HENDERSON, NV
Parts Used:
131873500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Could not turn on dryer,the timer knob was broken.
Opened the package and pushed knob on,took about 2 minutes.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anne from SANTA BARBARA, CA
Parts Used:
131644700
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Plastic door handle for dryer needed to be replaced.
Snapped the new door handle replacement from this site in place. Fits perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doug from TROUTDALE, OR
Parts Used:
131644700
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dryer door handle broken
I just used a putty knife to remove the broken one. It just popped right off.
The new one just popped into place.

I want to say that the girl / lady that answer the phone was extremely helpful and very professional,.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Myrna from Apache Junction, AZ
Parts Used:
134398300
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The start switch was broken
Took the front off the dryer and removed the old switch and put in the new one.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from CUMMING, GA
Parts Used:
134222900
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top hinge on clothes dryer separated, leaving door difficult to open/close
Ordered part from partselect.com. Part was back ordered; however they were very proactive in communicating status updates! When it arrived it was simply a matter of removing door using a philips screwdriver, installing the new hinge and presto - job complete! Kudos to partselect.com ??
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from FULLERTON, CA
Parts Used:
131644700
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken door handle
I unscrewed the 2 screws on the side of the door and the 2 screws on the bottom of the door, removed the broken handle and r replaced it with the new one.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donna from BAKERSFIELD, CA
Parts Used:
131644700
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door handle on washer broke.
Took out of package. Used screw driver to pop off old broken handle.
Installed new part in a minute or two. Nothing to it. Was very pleased to get the part and so easy to install.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia from BUFFALO, NY
Parts Used:
134398300
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dryer start knob broke clean off
I YouTube'd how to repair it. It was super easy. Needed a power drill to get the screwsa off and a flat head screwdriver to pry off the wires but besides that it took about ten minutes and I was finished.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from BLACK EARTH, WI
Parts Used:
131873500
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
old knob broke and fell off
Pushed the new knob onto the shaft
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from ALBUQUERQUE, NM
Parts Used:
134120900
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
quit heating
The repair went smoothly considering I am a rookie. The repair videos on your site are great. Followed the techs instructions and got thru it fine.

Thanks,

Jim
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GLEQ332CAS0
76 - 90 of 245