GLEQ332CAS0 Frigidaire Dryer - Instructions

Pulled off the old one and put on the new one. It was as simple as that!

replaced the knob. The key was the photos. It was celar that the part you had was the one I needed beacuse the phots were clear and with enough angles to assure me I was orederig what I needed.

I grabbed the new knob I ordered from Partselect.com with my right hand, aligned it, and put it on. Works like a charm!

I had my landscape guy, who volunteered to look at the dryer since he's also an electrician, come in and take a quick look. he turned the knob, pulled it off and told me the inside was cracked so it would not grab the turn mechanism. Who knew? I got the model number from the dryer door, checked in on the internet for Fridgedaire parts, found Partselect.com, ordered part, came next day, knob fits, dryer works. end of story. THANK U!!!

I opened the envelope that was waiting on the porch when I got home from work, opened it up, and pushed it on the shaft. It fit like a glove and looks more durable than the old one was. She'll never know I broke it. :)

Got the proper part and it worked great

Simple fix; just placed the new knob on the dryer. Fit perfectly. Best part was how quickly the part came in the mail! 2 days later. Very pleased with service.

Pulled old knob off and replaced with new knob. The hardest part of the repair was finding the part and partselect made that easy as well.

Removed the top of the dryer above the dryer door by pulling the pop out plastic holds. I then removed the dryer plug in at the top inside dryer that controls the start when dryer door is closed. I thenremoved the screws that are located at the back of the dryer tub where the bearing is located. I then replaced the support bearing. I just replaced every thing I took off in reverse.

As simple as pulling off the old, broken knob and sliding on the new one. 20 seconds tops.

Ordering on Partselect.com was easy, and shipped fast. This was my second order with Partselect.com, and I will order from then again, when whatever else can go wrong, goes wrong!

I love technology. First thing I did was google on "U-tube", "How to repair a squeaking dryer". Several videos out there so I just found the one I needed and watched. The repair itself went easy. A word of advice would be to be careful of sharp edges and to remember to unplug the machine prior to repair. While the drum is out, go ahead and get your shop vac and clean the inside of the unit out. Also, not only put grease on the new plastic holder, but put some on the shaft of the idler puller. I also used an awl to line up the holes on the front panel when re-installing the screws. One video I watched showed reaching in through the front to take the drum belt off the pulley, where another showed removing the inspection plate on the back. This made it much easier.

Dismantled the dryer to determine that the belt was broken. Called a local supply outlet to request a belt. They said they couldn't find one. Did an online search and found Part Select. Called with the model number and within three days the part was delivered. Replaced the belt and the dryer was working within an hour. Hardest part was getting the dryer out of the laundry room. I would certainly call PartSelect again if I needed a part.

just unplugged the old one, plugged in the new made sure it worked and put it back together.

Removed access plate in rear, raised top panel, removed two screws holding front panel (with door) put new belt over drum. Threaded belt through path between motor drive and idler wheel. Put everything back together.

My order was shipped very promptly, and was received very quickly. It is wonderful to have this service available on the internet. I can remember how difficult it used to be chasing down parts before. This was impossible in smaller cities.

Removed top and front of dryer and rear panel. Installed belt and new idler pulley. Reinstalled top and front panel and rear panel. Dryer worked great.