66512776K310 Whirlpool Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Debora from Los Altos, CA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The wheel guides on the top rack broke off
I found the schematic for my rack that detailed out the entire rack assembly so I was able to identify the sub assembly part that I could use to fix/keep my current rack. It was a snap in part. Pliers helped remove the old part, but not required for reassembly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from Webster Groves, MO
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Prongs holding wheel to upper rack trolly assembly broken.
Printed the expolded diagram for the upper rack asembly when I ordered the part and retained to use as a reference for replacing the rack adjuster. Part arrived within three days or ordering. Used screwdriver to remove clips holding broken adjuster in place and referenced the diagram to attach the new adjuster to the rack. From start to finish was no more than 10 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from Seminole, FL
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
wheels seperated from attachment on top rack
pop off old wheel attachment. There were three snap pieces holding it on. Then snap back on. Really easy to see how it is secured
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Dubuque, IA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rollers on rack adjusters, both sides
Just used a screwdriver to pry off the fastening clips -- removed adjuster from main assy and install new one, then installed clips back on. Very easy project
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Reno, NV
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Axle on the left side adjuster broke due to age or use, I guess.
Remove the top rack. Simply pry the three retainers loose,replace adjuster and retainers. Slide top rack into place. Incredible service. Ordered part Thursday morning& it arrived before noon the next day.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Lisle, IL
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Roller on adjuster on upper rack was broken
Ordered replacement adjuster, removed the old one, and installed the new one. Just have to be sure to re-attach new one in the same place as the old one. Very simple repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dan from Vero Beach, FL
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Roller on left rack adjuster broke
Used screw driver to remove brackets on the adjuster. installed new part by snapping back into place. Great customer service from PartSelect. Ordered part on Monday morning and received it after lunch next day.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juan from Chula Vista, CA
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Both Rack Adjuster rollers broken.
Unsnapped both racks and replaced with both sides.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Herndon, PA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Replace rack adjuster, wheel was broken.
There were 3 clamps that secure the rack adjuster to the rack. I only had to replace one side so I had the opposite side in tact to view the location of the clamps. All 3 clamps snapped in place. It was a very easy fix. 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kasandra from West Long Branch, NJ
- Parts Used:
- W10712394
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
The wheels broke off the melted plastic parts and top rack was not able to go in or out
I had to figure it out. No instructions are given with parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dianne from Hollis, NH
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Broken upper rack roller
Asked my husband to fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Meadowlakes, TX
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The wheels were broken off the rack
It was a simple snap it apart, put it back together using the new parts. Very simple. A small screw driver was used to help pry the snap together parts apart. No tools needed for reassembly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven R from Heltonville, IN
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Would not start
Very easy if you are mechanically inclined
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from newport coast, CA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
wheel on top rack broke
Really was repair. Pulled rack out of glides unclipped the broken rack adjustor, clipped in new one, using opposite side as a guide for the clips
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Waukesha, WI
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bbroken wheel in top dishrack
Very easy to repair. Took off two supporting clips, opened up the shelf adjuster and replaced part. Be careful prying open the adjuster
Was this instruction helpful to you?
Thank you for voting!