66512776K310 Whirlpool Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Carol from SOLOMON, KS
- Parts Used:
- W10712394
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Wheels missing
Took old parts off after removing rack. Installed new track adjusters
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from CHAGRIN FALLS, OH
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic wheels broke off when toddler pulled on it
Followed the pictures not hard at all.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from SANTEE, CA
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
rollers broke off of top shelf sliders
Searched YouTube and followed a YouTube video step by step. YouTube had the exact same part replacement instructions. Paper instructions were difficult to read, but YouTube repairman takes you through procedure with closeup video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from UNDERWOOD, IA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
the wheels for the slide on the top rack broke off on one side
the delivery time was terrific for the first thing. I placed all the parts out on the table and the instructions were very direct and simple to follow. it took more time to figure out the removal of the old plastic parts, but was very easy after you find where to place the screw driver to open the side cover and let the old adjuster fall apart. The new parts went in as directed by the directions, and pictures, very simply and it only takes a few minutes to complete and reinstall the top rack in the dishwasher. I was very pleased with all of the service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from DUVALL, WA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
BOTH SIDES OF UPPER WHEEL ASSEMBLY BROKE AND WHEELS FELL OUT.
Basically I just had to look at the instructions that came with replacement kit and follow the directions as shown.The included pictures for the kit were not very clear. Poor quality ! That being said, this install went very smooth, The directions were easy to understand and I had this dishwasher back up and running in no time. It was a pleasure to actually get this unit fixed so quickly. Thank You !!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- phillip*HOCOTT from WAYNESVILLE, NC
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Upper dish rack shelf track rollers.
First of all, the initial manufacture of the shelf rack rollers was substandard, and I replaced the left side less than a year ago, and both left and right side failed (rollers came off, causing shelf to drop down....not good!) When I "reordered' the parts the second time, I was pleased to see a "kit" was sent to replace "both" sides! Smart! I needed no tools, replaced the right side in 15 minutes, and the left side in 3 minutes. Much better than original parts! Thanks guys!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amanda from SPOKANE, WA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
The plastic grips broke off and would hold the top rack on the tracks.
It was so easy! Broke of the already broken supports and followed the easy step by step instructions with pictures.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Macedon, NY
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic stays holding rack adjuster wheels break off so it comes out of wheel track.
Instruction sheet is good but should stress that the thumb pads must face the front side of the dishwasher.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from KITTANNING, PA
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Top dishwasher rack rollers broke
Really went well. Very easy to repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dan from LOVELAND, CO
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Upper rack wheels would not stay on. Axels were worn down from use.
Removed upper rack.Replaced both side rack adjusters purchased from Kitchen Aid. Replaced upper rack and checked for easy operation. They were made superior to original parts, what I would call an upgrade. The instructions are well written easy to follow and in order of completion. One word of advice, dont snap keepers in place untill you are sure they are in correctly. The picture quality could be improved to better assist anyone not used to doing these type of tasks.
D Burton
D Burton
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from FREEBURG, IL
- Parts Used:
- W10712394
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
wheel on rack broke off
Removed old adjuster rack from both sides using a screw driver. Followed directions provided with rack adjuster kit and installed new adjuster on both sides.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- THOMAS from NEENAH, WI
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Rack Adjusters Replacement
This was my 4th time replacing these parts. Old parts where all plastic and I was lucky to get 6 months before they all disintegrated from the hot water washing. New parts are steel and replacing the old plastic parts was a piece of cake. Looks and even feels much stronger! Excellent youtube video
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from OREM, UT
- Parts Used:
- W10712394
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Three of the four roller wheel(s) on top adjuster rack broke off
Ordered the parts and installed them according to the enclosed instructions & photos that came with the repair parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roy from CHANDLER, AZ
- Parts Used:
- W10712394
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken wheels on top rack
The instruction included were pretty comprehensive. Also, it is not a difficult fix. Only thing I did different was install the release arm before snapping the upper part on to the rack. Liked the Phillips screw converter included in case someone does not have star bits for the screws. Returned the stop Clips, not needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from DAVISON, MI
- Parts Used:
- W10712394
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Pup per rack wheel hubs broke
I took the upper rack out set it on its side and followed the instructions that came with the parts. Then turned it on the other side and repeated the instructions. The nice part about the instructions is they they came with clear photographs of each step in the instructions. You could clearly see how the parts were suppose to fit. No guessing at all. Great job, who ever created them. I will not hesitate to but parts from this website and is saved in my favorites.
Was this instruction helpful to you?
Thank you for voting!