DB5710DT Samsung Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kathryn from Apopka, FL
- Parts Used:
- 99002654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Dishes on bottom rack not clean
I examined the arm on the floor of the dishwasher and found that it had collided with something sticking through the bottom of the lower rack. One of the jets on the tip of the arm, which was supposed to spray sideways to make the arm spin, was missing its top and now sprayed up. This put the arm off balance and kept it from spinning. I ordered a new arm from PartSelect. It arrived much sooner than I expected. With the pliers, I unscrewed the nut holding the arm on, replaced it with the new arm, and refastened the nut. The next time I used the dishwasher all the dishes on the bottom rack were clean.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Santa Fe, NM
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bottom rack wheel replacement
snapped it on to the rack shaft
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Poughquag, NY
- Parts Used:
- 99002654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
missing plastic nut on lower wash arm
Remove lower basket. put nut on verticle shaft, turn clockise by hand, use pliers gently to secure and replave lower basket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norman from Worthington, MA
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The wheel axle snapped off so the bottom dishwasher tray didn't close correctly
eash as pie. snap them onto the piece of frame on the bottom rack and the problem is solved
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brent from Lafayette, CO
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Upper Rack Wheel Eroded
Just one of the upper rack wheels in my dishwasher was in really bad shape for some reason, eroded away so it wouldn't stay on the track, causing the rack to jam up as was pulled out or pushed in. Simply popped it off with a little twist by hand, and slide the new one in, with the help of some needle-nose pliers. Easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matt from Mentor, OH
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheel Broke on Upper Rack
Took the end cap off the top rack and partially slid out the broken wheel. The old wheel was removed without any tools and new wheel replaced. This model has a center hub with clip for the wheel. The unit works great now. Website was easy to use to identify the correct part. Part came within 2-days of ordering.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Lewes, DE
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Upper wheel on rack was broken
Very simple to replace. Pulled off the stop on the track, pulled off the broken wheel, and slid on the new one. It helps to look at the orientation of the other wheel cause it is not "intuitive" how to thread it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from Bainbridge Island, WA
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Upper Rack Wheel Broke
Unclipped the old wheel from the rack and clipped in the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randall V from Loveland, OH
- Parts Used:
- WPW10275768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door wasn't latching and started its cycle before door was shut
I just followed another persons directions that was in the system already. He had a great idea by taking the new switches out of the new latch and replacing them with the old ones from the bad latch. The old switches are still good and it made for a simple repair. This way you didn't have to disconnect the wire from the switches and now you have two new switches on hand. The old switch had a burnt spot on the connector.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ruth from Canyon Lake, CA
- Parts Used:
- WPW10275768
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
The dishwasher door latch was broken and would not hold the door closed.
I unplugged the dishwasher under the sink. I opened the dishwasher up and took out the 12 screws holding the inside door facing on. I gently moved the door facing down towards the dishwasher to reveal the door locking mechanism at the top of the door. I unplugged the mechanism and plugged in the new one. I put the door back together the same way I had taken it apart. In all it took about 12 minutes. Works like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from Sandwich, IL
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rack roller split in half and fell out of slide.
Very simple to change out. Unsnap the broken one off rack and snap new one in place. Take snap in stop out of slider and put roller into slide, reinstall stop and your done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cheryl from Bend, OR
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Upper rack wheel broke.
Easily Installed new wheel. We used existing wheel on opposite side as a guide.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kimberley from Glendale, CA
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken wheel upper rack
repair easy. part matches perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Chicago, IL
- Parts Used:
- WP99003147
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
broken wheel on upper rack
unclip and slide broken wheel off. Slide new wheel on and clip. Easy as pie!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Gig Harbor, WA
- Parts Used:
- WP99003147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken wheel on top rack
Used flat screwdriver to remove the end cap from the slide bar and after removing the old wheel which popped right off, the new wheel was popped back into place and slid into the slide rail and the end cap replace.
Was this instruction helpful to you?
Thank you for voting!