DB5710DT Samsung Dishwasher - Instructions

Took out rack, removed old wheels and got the new ones installed.

On a Saturday I ordered the wheels from Parts Select ( with
a most helpful young lady, and on Tuesday, the parts arrived
at my residence.

Before I found Parts Select, I had gone to TWO local appliance stores, and they were "unable" to find in their
computer(s), and parts book(s), the replacement wheels.

When I went to the Parts Select website, within five minutes
I found excellent graphics for the exact wheels.

Later I called one one appliance store, and gave him the
Parts Select website, so he too could offer better parts
selection to his customers.

ordered new roller and installed it.
easy to order, friendly and helpful supplier, part came quickly via Fed Ex. No problem.

I called for a Lowes where I purchased the dishwasher was told it was out of warranty, they set up for a repairman to come out and fix it. He came out and told me it would be $190.00 for parts and labor but that didn't include the service call of $60.00 dollars. Total bill would be $250.00, plus it would be another 2 weeks before he would be able to get back because he had to order the part but and get this I would get the part delivered to the house before the two weeks, and that he wouldn't guarantee the part for more then 90 days.
I told him no way, so I researched the internet and found this site part cost $25.00 dollars my time about 30 min. SAVINGS of $225.00.
The part was pretty easy to install had to take out a few screws around the edge. Only trouble I had was putting in the handle but I figure that out and put everything back together again.
I would purchase parts from this company again had it within 2 days, at a very reasonable cost.

It was very simple and easy. I opened the panel inside the door; total of 8-10 screews. The latch has two electrical connections and switches. The replacement part I got came with an extra set of switches. Replacing the switches needed an electrical tool which I don't have so I decided to keep the old ones. It is quite easy to take out the switches and replace the latch. I should have taken out the power; but I did not. I was just careful handling the wires et al; no big deal either. My dishwasher is working fine now. I was able to fix it within $40 and 1 hour of effort. Any technician would have cost me atleast couple of hundred bucks + parts etc.

Finally had to remove front foot panel and laminated top. Removed screws on back and one side to get to open cabinet to insert hose properly.

After checking the door switch I found the micro switches were working but the unit would not start on the control panel. Thinking the latch was worn, I ordered a replacement. After changing the replacement latch and switches that came with it, the unit would still not start. I checked the switch and it is making contact. I can start the unit after I close the door using the handle of a pair of pliers. So I assume the control board is bad, due to the fact that it will not initialize the control panel until the door is closed. Now I have ordered a control board and will replace...stay tuned!!

Took the door of the dishwasher apart and the replaced the lever assembly. The lever assembly does not come with a door handle, so you have to remove the old door handle from the old lever assembly and install the door handle on the new lever assembly. Installing the handle on the lever assembly was the hardest part, the rest of the installation was easy.

The latch that opens the door to the diswasher was broken. It became difficult to open the dishwasher door.

A quick search on the internet using the machine make and model took me to Partselect.com. Another quick seach of the exploded views of my dishwasher gave me the part number and a few more clicks had it on order.

I recieved the part buy the end of the week. and had it installed within 15 to 20 minutes and I was up and running.

What a deal!!! Thanks

the removal of panel was simple, the removal of electrical connections was difficult even with a little wd 40 i was nervous when any metal part is attached to a plastic part. it didn't want to let go but my suggestion is to work the connecter back and forth forward and back to get it started then with a firm grip on the wire harness with pliers pull the two apart with pliers. good luck!!!

Opened the dorr, removed the inside panel = the most time consuming part - and then exchanged the handle assembly. Then replaced the panel. Snap!
The hardest part was determining the part that I needed - the right part that did not involve repairing the/an assembly. Luckily I got the right one and two un-needed parts.

Stuff happens.

All screws are on the inside of the dishwasher.Not a good place when the washer is closed and the handle breaks.Had to take a box cutter and remove some plastic in the handle area to be able to remove broken handle and open dish washer.Once open this repair is a piece of cake.2 wires and a hand full of screws.

All I did was put the new wheels on. They were really fast with shipping. I put my order in one day and the parts were there the next.

Replase door lach Thang you for the fast respons Peter Hansen

Popped the wheels on just like the ones that were still there and it was good to roll. Nice!