MDBCUBEAWX Maytag Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Douglas from Pickerington, OH
- Parts Used:
- WP6-917647
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cups and glasses on upper rack were not getting clean.
Docking station just pops out, you grab the right side and pop it off. Replace by placing the left side in place and then push the right side until it snaps in place. VERY easy.
The gaskets were worn out and that was allowing a lot of water to escape, not enough pressure to clean the dishes.
The gaskets were worn out and that was allowing a lot of water to escape, not enough pressure to clean the dishes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dan from Franklin, WI
- Parts Used:
- WP6-917644
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher arm keeps falling off.
I bought 2 Maytag appliances, a microwave and a dishwasher - they are both crappy!
The top plastic spray arm kept falling off into the top shelf of the dishwasher, causing all of the glasses on that shelf to come out dirty.
The arm has a small bracket that can snap off and on the main water tube easily without tools.
Changing it was a snap!
The top plastic spray arm kept falling off into the top shelf of the dishwasher, causing all of the glasses on that shelf to come out dirty.
The arm has a small bracket that can snap off and on the main water tube easily without tools.
Changing it was a snap!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Veryle Lynn from Lake Lure, NC
- Parts Used:
- 6-918651
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
basket was broken
took out the old basket and put in the new one which required no tools
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from Mill Valley, CA
- Parts Used:
- WP99002735
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The dishrack tines were falling over and not holding the plates.
It only took a couple of seconds to snap in the replacement dishrack tine pivot parts. I didn't know how easy it was to get replacement parts and lived with the problem for months. The parts were easy to figure out on the website and arrived in a couple of days. Problem solved.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lance from Duvall, WA
- Parts Used:
- 99002624
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
old wash arm was cracked and had gunk in it.
The upper arm assembly removes easily by unsnapping a plastic part or two that holds it in place.
Once the arm assembly is removed, you simply remove the screw that holds the arm on, replace the arm, and replace the screw. The key thing here is that you need a "star drive". This is a screw driver or bit that has a star shaped end. I don't know what size it is.
Once the arm assembly is removed, you simply remove the screw that holds the arm on, replace the arm, and replace the screw. The key thing here is that you need a "star drive". This is a screw driver or bit that has a star shaped end. I don't know what size it is.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laura from Darien, IL
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower diswasher tray missing 3 wheels
All I had to do was litterally snap the wheels into place..it was so easy and so cheap!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paula from Bloomington, IL
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken wheels on dishwasher racks
The plastic wheels on the upper and lower racks keep breaking. The latest casualty was also chewed up by the dog(s). They just pop right on the posts, a simple 2-second fix. I ordered the parts on a Tuesday morning, standard shipping, and they arrived FedEx less than 24 hours later. They came from Peoria, and I live about 1 hour away in Bloomington. Very pleased with the service. Will order from PartsSelect again if I need parts for any other appliance that I can fix myself.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from BLUE SPRINGS, MO
- Parts Used:
- WP6-917644, WP6-917642
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
WAS NOT GETTING DISHES CLEAN
UNSCREWED THE LOWER PART BY PLIERS AND HAND. COULDN'T UNDERSTAND WHY THE LOWER
PART WAS AVAILABLE BUT THE UPPER SPRAY ARM
WAS NO LONGER AVAILABLE WHEN THEY BOTH GO TOGETHER..
PART WAS AVAILABLE BUT THE UPPER SPRAY ARM
WAS NO LONGER AVAILABLE WHEN THEY BOTH GO TOGETHER..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DAVID from IOWA CITY, IA
- Parts Used:
- WP99002710, WP99002709
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
The original tine pivot had broken.
Mixed feelings here. The video was helpful and the part fit like it was supposed to. No tools needed. But the tines in my dishwasher are not tall enough to reach the pivot so the problem isn't solved.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from FRANKFORT, IL
- Parts Used:
- 6-918651
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new basket
Replace the silver ware holder
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diana from ST PETERSBURG, FL
- Parts Used:
- 6-918651
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
bottom of silverware basket was broken out in spots allowing item to fall through
Very, very difficult repair! First I had to order a new basket online - there is only one basket offered so I chose that one. Had to wait two whole days before it was delivered. Never thought I was going to get the darned box open! Had to lift the broken basket out and inserted the new one. Whew! When you're 73 years old, you are just happy to remember where the dang dishwasher is. Good news was that even at my addle-pated age, I was able to effect the repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from S HAMILTON, MA
- Parts Used:
- WP99002659
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Washer screen was clogged
In order to clean the screen I had to remove the impeller. Removal required using a wheel puller. I backed off on the impeller screw but left it attached so that the wheel puller could pry against it. I then tightened the puller enough to free the impeller. I was then able to unscrew and remove the screen for cleaning.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jay from Arlington, WA
- Parts Used:
- WP99002735
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
one of the dish rack tines broke when I forced a large platter into the rack
It took a few minutes for me to reallize that I needed to look at the way/direction the tine clip was in the existing position. It is important to mesh the part into all the correct positons before trying to complete the repair into the final snap/placement of the tine/clip. A minute or two of looking and (really important) not trying to replace both front AND rear tines at the same time! They are mirror images of each other. If you change one at a time, you can use the other as a template!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Francine from Bristol, CT
- Parts Used:
- WP6-917644
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Top wash arm kept falling off.
I had to remove the the old retainer from the old wash arm ,install it on the new arm by snapping it on then I snapped the arm with the retainer up top of dishwasher.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edgar from San Jose, CA
- Parts Used:
- 12002185
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Replace bottom Pan Rack
Installed new wheels on the new axle/clip parts which were provided in the newly purchased kit along with the new rack.
Had to use needle nose pliers to pinch plastic axle ends together to be able force plastic wheel onto axle. Eight axles/clips and eight wheels. After axle/wheels assembled the axle/clips snap on to edge of rack. Four on wheels on each side of rack. Slid new rack with new wheels into dishwasher. Rack fits much better with newly supplied wheels which are slightly wider than the original wheels.
Had to use needle nose pliers to pinch plastic axle ends together to be able force plastic wheel onto axle. Eight axles/clips and eight wheels. After axle/wheels assembled the axle/clips snap on to edge of rack. Four on wheels on each side of rack. Slid new rack with new wheels into dishwasher. Rack fits much better with newly supplied wheels which are slightly wider than the original wheels.
Was this instruction helpful to you?
Thank you for voting!