MDBCUBEAWX Maytag Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ken from Mapleton, UT
- Parts Used:
- WPW10192799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The dishwasher got the dishes dirty not clean
My married daughter actually did the repair. I removed the plastic assemblies that held the upper cage and upper spray assembly. She unscrewed the screws that held the filter/impeller assembly in place and replaced the old one with the new one. I finished the job by cleaning the interior of the washer and putting everything back together. The dishes are sparkling clean again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Denver, CO
- Parts Used:
- 99002780
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Lower basket wheels fell off and were melted
Orderd the part's from your web site (recived my order in a timley fasion thanks) the parts just sliped on and clipped' basket rolls great. Mike Schaffer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Lake Zurich, IL
- Parts Used:
- WPW10192799
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
dishes not clean
with dishwasher running I would open the door and notice the lower spray arm was not turning. I removed all parts in the tub and clean off all the accumulated gunk (likely combination of food and soap scum - like a white paste) . The accumulator screens where more than 50% clogged with no way to clean the inside. I replaced the accumulator part and the lower spray arm because 2 holes had gunk in them that would not come out. dishes are now getting clean and I am switching to liquid - no more powder as I suspect it caused the build up over time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Fayetteville, GA
- Parts Used:
- WP6-917644
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Upper wash arm would not turn.
Snapped the old part out and snapped the new part in.
It was a piece of cake.
It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Georganne from Carolina Beach, NC
- Parts Used:
- WP6-917642, 99002654
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The dishes in the dishwasher weren't getting clean. I decided it would be cheaper to replace the clogged wash arm myself, before calling a repairman.
First, I removed the screw, then I took off the old wash arm, then I replaced the wash arm, and replaced the screw. Nothing could be easier!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Jackson, MO
- Parts Used:
- 6-918651
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed to replace flatware baskets
one: removed old baskets
two: and put in new baskets.
two: and put in new baskets.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Centreville, VA
- Parts Used:
- WP6-919539
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Soap dish full of west soap, dishes not clean: Isolated to stripped pump shaft, foreign object jammed chopper
Troubleshooting: Noted soap dispenser full of apparently wetted soap, drying cycle dried to brick-like mess. Dishes full of soap particles, not clean. Water through floor and basement ceiling.
Pulled all racks (note arrows on ends of rack supports), used vice grips to remove bottom spray arm (better to use washcloth around little knob to protect from vice grips), unscrewed all torx fasteners to get assembly out. Had to carefully maneuver pump housing out since it attached to water distribution assy. Found stripped sleeve, but didn't understand function until I saw similar post on this site (Thanks!). Ordered seal and chopper kit, paid extra for "2 day" delivery and rx the next week due to holiday weekend (what's up with that? I ordered a linksys security camera on saturday and rx on Sunday from "Lasership"). Followed included instructions - worked fine. Note assembly order of pump with respect to water distribution assembly - I assembled and dissassembled twice due to forgetting interference.
Pulled all racks (note arrows on ends of rack supports), used vice grips to remove bottom spray arm (better to use washcloth around little knob to protect from vice grips), unscrewed all torx fasteners to get assembly out. Had to carefully maneuver pump housing out since it attached to water distribution assy. Found stripped sleeve, but didn't understand function until I saw similar post on this site (Thanks!). Ordered seal and chopper kit, paid extra for "2 day" delivery and rx the next week due to holiday weekend (what's up with that? I ordered a linksys security camera on saturday and rx on Sunday from "Lasership"). Followed included instructions - worked fine. Note assembly order of pump with respect to water distribution assembly - I assembled and dissassembled twice due to forgetting interference.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joann from Queensbury, NY
- Parts Used:
- 99002780
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
New Wheels needed on dishwasher tray
Very easy after watching the video. thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Warwick, RI
- Parts Used:
- WP6-919539, WPW10192799, WP6-917025
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
Dishwasher Arm Not Spinning
I removed flowplate assembly, chopper assembly, found that the plastic spindle was stripped causing arm not to spin. In the new seal kit, the spindle was made of metal (much better design). I replaced the spindle, chopper, and filter assembly (old one was caked full of gunk). Worked like a charm. A previous post helped me figure out the problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from OLD ORCHD BCH, ME
- Parts Used:
- 6-918651
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Needed a new silverware basket
Opened door
Put in place
Closed door
Whined about being tired
Put in place
Closed door
Whined about being tired
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- angela from Powell, OH
- Parts Used:
- WPW10192799
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
dishes had small bits of food stuck on
I removed the main plastic bolt with a pliers and then just used a screwgun with a star tip for all the screws.
I am a 43 year old woman with no experience and I was able to figure it out. The machine cleans much better now.
I am a 43 year old woman with no experience and I was able to figure it out. The machine cleans much better now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carole from Noblesville, IN
- Parts Used:
- 99003190, WP99002735
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Folding dishracks had broken latches to hold them in place making it impossible to properly "stack" my dishes. I actually called this the dishwasher from hell until I found PartSelect and was able to get the parts needed to fix those darne d folding racks. Now it's like a new dishwasher.
Simple removed the paperclip I put in place last summer to hold the rack in place, snapped both new parts where they belonged, and WOW, it's like new. So easy. And the best part was that I had the replacement parts in less than 24 hours! Talk about fast service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doug from SANDIA PARK, NM
- Parts Used:
- WPW10192799
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Grit on all the dishes, spots on glasses and hard water buildup inside the entire dishwasher
1. Remove both upper and lower dish trays
2. Remove the “Spinner /Sprayer” (small nut on the top)
3. Unclip the “Tower” from the top and rear clip
4. Remove the “Tower” from the unit
5. Remove the “Filter Guard” on the bottom by removing 3 torx screws
6. Remove the “Discharge Housing” & “Impeller” (1 – 15 torx screw)
7. Remove and replace the “Accumulator Filter” (8 – 20 torx screws)
8. Assemble in reverse order
2. Remove the “Spinner /Sprayer” (small nut on the top)
3. Unclip the “Tower” from the top and rear clip
4. Remove the “Tower” from the unit
5. Remove the “Filter Guard” on the bottom by removing 3 torx screws
6. Remove the “Discharge Housing” & “Impeller” (1 – 15 torx screw)
7. Remove and replace the “Accumulator Filter” (8 – 20 torx screws)
8. Assemble in reverse order
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Billings, MT
- Parts Used:
- WP6-917647
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dishes were not getting clean on the top rack.
The old docking station seals were getting very soft. To put a band aid on the wound until the new docking station got here I put a sleve on the washer bar feeder tube. This made an improvement. The docking station was removed using a screw driver to unsnap the station. Then all I had to do was snap the new one in. Be care ful not to pull on the piece the docking station is snapped on to. There are metal clips behind there that hold that water delivery tube on to the back of the dishwasher. Those clips are twisted on and can be striped off easily by pulling strait towards you. If that happens you must secure the clips using self tapping screws and a water proof sealent.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lizbeth from Kingston, TN
- Parts Used:
- 6-918651
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The bottom of the flatware basket broke out
Replaced with new basket
Was this instruction helpful to you?
Thank you for voting!