Models > 66213293K112 > Instructions

66213293K112 Kenmore Dishwasher - Instructions

Jump to:

All Instructions for the 66213293K112
76 - 90 of 385
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Peter from E NORTHPORT, NY
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broke wheels on upper rack
Watched instruction video on You Tube. Easy to figure out how old adjuster came off. Followed instructions from video on installation. Did not have proper star screwdriver, but was able to use allen wrench on two screws.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
kevin from MINOT, ND
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
rack adjuster wheels broke
You have to go online and watch a video of how to install the replacement part. Ten or so minutes later you are done.You tube makes everything easier.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Richview, IL
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Wheels which support the rack broken
Followed the instructions included with the kit, took a little while to figure out what the photos were showing. But essentially installation was easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elette from EL CAJON, CA
Parts Used:
WPW10195622
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Changed out the rack adjusters and wanted new clips to complete the project
They snapped into place very easily no tools required
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandra from CINCINNATI, OH
Parts Used:
WPW10195622
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Rack stop clip broke
Popped the old clip out, replaced with new.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from DAMASCUS, MD
Parts Used:
WPW10195622, W10712394
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top drawer kept falling out or wheels would fall off
Removed old parts easy. Then used replacement parts and back together again.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
rob from HAMILTON, OH
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Original rollers broke off
Read the instructions, removed old parts, installed the first side in about 4-5 minutes, second side about 3 minutes. Took longer to read instructions, than to repair. This is a great repair package, this appears to be a lot better than original parts. Fast service, very helpful customer service personal for return parts, as I ordered parts I didn't need. Thanks again rob h.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DONNA from BOONEVILLE, MS
Parts Used:
WPW10195622
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The clip on the back upper rail broke
I used pliers to pull the old clip out and pushed the new one in. Easy as that!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from GILBERT, AZ
Parts Used:
W10712394
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
clip holding the rollers broke allowing one side to drop
The repair kit was easy to install, required a torque tip screw driver and thin flat head screw driver to remove the old parts. Took me 15 minutes start to finish. Simply follow the instructions provided with the kit. Nothing else needs to be said.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chris from BAINBRIDGE IS, WA
Parts Used:
W10712394
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Upper dish rack adjuster failed
Figured out what was worn and went to website to order replacement parts. Three days later the parts show up, I find the replacement parts are better build than the original parts. Took less than 30 minutes to repair and reinstall. Works perfect. Website was easy to use and the repair was simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffrey from DAVISON, MI
Parts Used:
W10712394
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Pup per rack wheel hubs broke
I took the upper rack out set it on its side and followed the instructions that came with the parts. Then turned it on the other side and repeated the instructions. The nice part about the instructions is they they came with clear photographs of each step in the instructions. You could clearly see how the parts were suppose to fit. No guessing at all. Great job, who ever created them. I will not hesitate to but parts from this website and is saved in my favorites.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dan from LOVELAND, CO
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Upper rack wheels would not stay on. Axels were worn down from use.
Removed upper rack.Replaced both side rack adjusters purchased from Kitchen Aid. Replaced upper rack and checked for easy operation. They were made superior to original parts, what I would call an upgrade. The instructions are well written easy to follow and in order of completion. One word of advice, dont snap keepers in place untill you are sure they are in correctly. The picture quality could be improved to better assist anyone not used to doing these type of tasks.
D Burton
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from KITTANNING, PA
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Top dishwasher rack rollers broke
Really went well. Very easy to repair
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
THOMAS from NEENAH, WI
Parts Used:
W10712394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Rack Adjusters Replacement
This was my 4th time replacing these parts. Old parts where all plastic and I was lucky to get 6 months before they all disintegrated from the hot water washing. New parts are steel and replacing the old plastic parts was a piece of cake. Looks and even feels much stronger! Excellent youtube video
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Victoria A. from CATONSVILLE, MD
Parts Used:
WPW10195622
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
End stop on the upper rack of the dishwasher
Reviewed the video of this problem. Followed these instructions using a flat screwdriver to release the broken stop. Then used the same tool to set the piece firmly in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 66213293K112
76 - 90 of 385